DAEWOO DTW-28W2F_ DTW-2810F _ SERVICE MODE
TO ENTER SERVICE MODE
- Set the TV Pr 91
- Sharpness “ MIN “ control.
- Push the Red, Green, Menu buttons in regular sequency within 5 seconds after setting TV power off. You can see the Menu of “ service mode “ on the screen.
- The PR UP/DOWN buttons on the remote controller are used to move the selection bar up or down the Menus.
- The VOL UP/DOWN buttons on the remote controller are used to adjust levels.
- To exit from “ Service Mode “ then power the TV off.
REMOTE CONTROL [R23D05]
R22D05
ST92195
PIN CONFUGURATION