DIRECT TV REMOTE CONTROL PROGRAMMING METHOD. 

HOW TO PROGRAM DIRECT TV REMOTE CONTROL

There are some people who have a direct TV remote control and did not know how to synchronize it with their devices.  Here are general proceedings to follow.
*  Just turn ON your TV set, and point the Direct TV Remote Control to it, and Press remote controls' TV button.
** Press and 'HOLD' the 'Setup" button on the remote control until the TV standby light goes OFF state.
***Enter "991" with remote control's numerical buttons.  Now the TV light on the remote should blinks twice. ****Just aim the remote control to TV.  Alternate between pressing "TV" and "Power" buttons on your remote handset.  The television set will turn 'OFF'.  Once it had turned "OFF", Press "Setup"button on your remote control to to lock in and save the code.
*****If you have to search for codes to other devices, and wants to program them with this same      remote control, repeat these steps. Make sure to use appropriate key for the other device instead of TV.