HOW TO ENTER THE SERVICE MODE, AND ADJUSTING PARAMETERS FOR SONY TVs, USING [RM-869] MODEL REMOTE CONTROL HANDSET

Entering into service mode

When the unit is on ‘Standby condition, Press:

[DISPLAY]à[5]à[VOL+]à[POWER]

This sequence of operation puts the TV into service mode.

Service Mode Keys

[1] and [4]:  Raise/lower the service item number.

[3] and [6]:  Raise/lower the data.

[MUTING]:  Writes.

[0]:  Executes the writing.

Cancellation of Service Mode

Set the “standby” condition (Press Power Button on the remote control) and then Press ‘Power” button again.  The set becomes to TV mode.

Method of Write into Memory

1. Set to service mode
2.   Press [1] (UP) and [4] (Down) to select an item to adjust.
3. Press ‘Muting’ button, and it will indicate “Write” on screen.
4. Press [0] button to write the data into memory.

Memory Write Confirmation Method

1. After adjustment, pull out the plug from AC wall socket, and replug it again.
2. Turn the “Power” switch ON, and ser to ‘service’ mode

Call the adjusted items, and confirm that they were adjusted