HOW TO ENTER SERVICE MODE TO SANYO PLV-55 WHD1 - PLV-65 WHD1 -LCD PROJECTION TV

Sanyo PLV 55 - PLV65 LCD Projection TV - Service Mode

# To enter service mode, press and Hold the "INFO" button on the remote control, and then "Vol--ve" button on the side panel of the TV.

> To call an item to adjust, use [CHANNEL UP & CHANNEL DOWN] buttons on the remote control
> To adjust the data value to selected item, use [POINT RIGHT or VOL+ & POINT LEFT or VOL--ve] buttons on the remote control.

>> To exit from service mode, press "POWER ON/OFF" only once on the TV or on the remote control.