HOW TO SELECT MISSED CHANNEL ON TVs
There are a number of causes for this problem.
Parential Controls:
The channel may be blocked or is not approved in the parential control menu, if you have this feature.
Accessing parential control Menu, depends upon the TV model.
OPTION -A
- Press "Menu" to display 'Main Menu".
- Select the parential control menu
OPTION - B
- Press "Menu" on your remote control to display the main Menu.
- Select "TV Setup".
- Select V-Chip Set.
TV/VCR mode:
If you are using VCR, the TV/VCR button could be in wrong selection. Press TV/VCR button on the VCR to rectify this.
Cable/Air setting:
The Cable/Air function could be in the wrong position. There are different to correct this, depending on model.
1 Press the "Menu" button on the remote control and select the
"Channel" Menu. Select the correct signal type. Antenna or Cable.
2 Select the Guide+TM, from the main menu, select Setup option, provide correct information there.
3 Check the reception: Cable or Air in the Setup Menu.
4 Auto Channel Search:
If channel can be accessed using the number of digit buttons on the
remote control, but not the CH+/CH-- buttons, it may not be programmed
in the Auto Channel Search function. To access this:
- Press 'Menu" button on the remote control.
- Select the channel menu.
- Select Auto Channel Search.
- Do a new search, or add the channel manually.