HOW TO SYNCHRONISE A PHILIPS MAGNAVOX UNIVERSAL REMOTE WITH DEVICES.

 *  With fresh batteres in, Press the Power button on the top right corner of the remote control.  By default the remote starts in TV mode.
**  Enter the codes for each device you want to synchronise with.  Press the "Code Search" button and follow the prompt on the screen.  You can enter the code by direct code enter method, or by code search method. If there is setup codes for your device, with the code list of the remote control, you can adopt direct code entry method. If not, code search can be done..
***  Select the device you want to control remotedly.  The device/s you can control with this remote control, will be marked on its front, and respecive buttons also will be there.
****  Switch between devices, by pressing the respecive device button on the remote control.
*****  Enter code for each devices, ie TV,VCR,DVR Etc-, either by direct code entry method or code search method.  All these setup proceedings will be there on the attached catelogue, when you buy it new