LED LCD TV FIRMWARE UPDATING SOFTWARE FIRMWARE TO MSTAR SOC

LED LCD TV  FIRMWARE UPDATING SOFTWARE FIRMWARE TO MSTAR SOC

Mstar Main S/W Program Download

• Connect the download jig to D-sub(RGB) jack.
• Execute ‘ISP Tool’ program, the main window (Mstar ISP utility Vx.x.x) will be opened.
• Click the “Connect” button and confirm “Dialog Box”

• Click the “Config.” button and Change speed I2C Speed setting : 350 Khz ~ 400 Khz.
• Read and write bin file.  Click “(1)Read” tab, and then load download file (XXXX.bin) by clicking “Read”.

• Click “(2) Auto” tab and set as below.
• Click “(3) Run”.
• After downloading, you can see the “(4) Pass” message.

USING MEMORY STICK

• Insert the USB memory stick to the USB port.
• Automatically detect the SW Version. à  S/W download process is executed automatically.
• Show the message “Copy the file from the Memory.
• After Finished the Download, Automatically DC Off à On.
• Check the update SW Version.