Philips DCM292 How to disassemble – Circuit diagram -Dock for iPhone - iPod Sleek micro system
LIQUID LENS CLEANINGBefore touching the lens it is advised to clean the surface of the lens by blowing clean air over it. This to avoid that little particles make scratches on the lens.
Schematic
Click on the pictures to zoom in
Disassemble procedure
1)
Remove the 12pcs screws(BT3x12) on the side cabinet to discharge the rear
cabinet and place it well.
2)
Remove the FFC cable on IPOD BD from Main BD,1st get remote control lens out,
then remove the 4pcs screws (PA 2.3x8) which fix IPOD BD to discharge IPOD BD.
3) Remove all cables on Main BD; PS: Get your hand to the Main BD as close as
possible when you unplug the cables to avoid damage to cables.
4) Remove the 4pcs screws(PT 3x8) on Main BD rip off the black paper from FCC cable on CD deck discharge Main BD and place it well; rip off the black paper from FCC cable on CD deck, discharge Main BD and place it well.
5)
Remove the 4pcs screws(PT3x8) on CD deck, please add some soldering on the weld
protect point and keep it in a ant-static bag.4) Remove the 4pcs screws(PT 3x8) on Main BD rip off the black paper from FCC cable on CD deck discharge Main BD and place it well; rip off the black paper from FCC cable on CD deck, discharge Main BD and place it well.
6) Remove the 4pcs screws(PA 2.3x8 ) on Display BD, discharge Display BD and paste protect film on it and place it well.
7) Draw the CD door with your right hand, press one buckle with your left hand (pic 7-1),then press the other buckle (pic 7-2),discharge CD door and place it well.