TOSHIBA - LCD - AD194TW_ DISASSEMBLE PROCEDURE
- Disassemble the fixed four screws of stand. Remove the base and stand following the direction of arrowhead showed.
- Disassemble the fixed 4 screws of the back cover.
- Insert a plastic card or abandoned IC card in the bottom of the monitor, between bezel and back cover, and remove the back cover.
- Disassemble the two screws and 3 connects pins of KEPC board.
- Disassemble 2 screws and 4 pins that fix the shield, and remove the shield the direction of arrowhead.
- Disassemble connect pins of the main board to panel.
- Remove the bezel.
- Disassemble screws that fix the panel. That's all. Process is over.
EXPLODED VIEW
