BENQ MK2443 - LCD MONITOR TV - FIRMWARE UPDATE PROCEDURE - SERVICE MODE

BenQ MK2443 - LCD MONITOR TV - FIRMWARE UPDATE PROCEDURE - SERVICE MODE

SOFTWARE UPDATE

• Press keypad to enter Factory Mode.
• Press “Enter” key + “Channel Up” key together to enter Factory Mode
• Confirm software version.

THE ISP SOP FOR MST

• Connection PC to the Tv set by the tool as the follow picture.
• Action: The D_SUB cable must be 15 pin, and the TV set must be AC ON

DRIVER INSTALLATION

• Press 'Next' to continue.

• Press the “close”,the driver installation ok.

Start the Isp

• Open the “ISP_Tool V4.4.1.8.exe”
• Press the “config”, if the the ISP board have been found, you will see the picture as bellow.

• Pull away the AC power Cord and the D-SUB Cable. And start another TV set.
• When we start another TV set with AC ON, we only need to press the “RUN”