Monday, 18 March 2019

DAYTEK - LC1508NT – LC1521NT – LC2018NT - HOW TO ENTER SERVICE MODE [FACTORY MODE] -

DAYTEK - LC1508NT – LC1521NT – LC2018NT - HOW TO ENTER SERVICE MODE [Factory Mode] -

SERVICE MODE
  • Using the remote control, press Menu button once first.
  • Then press PRE.CH (or named RECALL) button five times, and you can see manufacture menu on the LCD panel.

  • Press the channel  +/- button to selection the sub menu of factory menu (including F, E, UOCIII, RGBTemp, Temp, and press the Vol + to enter the sub menu and setting the value.
To exit the factory menu
  • Press the MUTE button again and again or turn off the TV, it can exit the Factory Menu.
at