Wednesday, 13 March 2019

DAYTEK LCD TV - LC1508NT - LC1521NT - LC2018NT - FACTORY MODE [SERVICE MODE]

DAYTEK LCD TV - LC1508NT - LC1521NT - LC2018NT - FACTORY MODE [SERVICE MODE]

TO ENTER SERVICE MODE
  • Using the remote control, press Menu button once first, then press PRE.CH (or named RECALL) button five times, and you can see manufacture menu on the LCD panel.
FACTORY MENU OPERATION
  • Press the channel “▲/▼” button to selection the sub menu of factory menu (including F,E,UOC, RGB Temp, Temp, and press the vol to enter the sub menu and setting the value.
To exit the factory menu Press the MUTE button again and again or turn off the TV.