DVD406E_DVD408_DVD408E_DVD506E_DVD508_DVD508E_DVD808_DVD808E_DVD908_DVD908E – DISASSEMBLEY – Take out a disc when not eject – Fixing Flash error
TO TAKE OUT A DISC WHEN NOT EJECT (FORCE
EJECT)
Remove the screw (M1.7) and front cover (227).
Insert the wire etc. in the hole and up the lock arm by it.
Self-diagnosis Display
When problems occur while the unit is operating, the counter of the viewfinder or LCD screen shows a 4-digit display consisting of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in which the problem occurred, and “detailed code” of the problem. Insert the wire etc. in the hole and up the lock arm by it.
When problems occur while the unit is operating, the counter of the viewfinder or LCD screen shows a 4-digit display consisting of an alphabet and numbers, which blinks at 3.2 Hz. This 5-character display indicates the “repaired by:”, “block” in which the problem occurred, and “detailed code” of the problem. Insert the wire etc. in the hole and up the lock arm by it.
SELF DIAGNOSIS WINDOW & CODE DETAILS
PROCESS AFTER FIXING FLASH ERROR
When “FLASH error” (Self-diagnosis Code E:91:01) occurs, to
prevent any abnormal situation caused by high voltage, setting of the flash is
changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. For the method of the error release, refer to “6.Record Data, Initializing method (All Record-Data)” in service manual, ADJ. Note: The error cannot be released only by initializing only the self-diagnosis data, be sure to execute the initialization of all record-data to release the error.
After fixing, this setting needs to be deactivated. For the method of the error release, refer to “6.Record Data, Initializing method (All Record-Data)” in service manual, ADJ. Note: The error cannot be released only by initializing only the self-diagnosis data, be sure to execute the initialization of all record-data to release the error.
DISCHARGING OF THE ST-154 BOARD’S
CHARGING CAPACITOR (C5206)
The charging capacitor (C5206) of the ST-154 board is charged up
to the maximum 330 V potential. There is
a danger of electric shock by this high voltage when the capacitor is handled
by hand. The electric shock is caused by the charged voltage which is kept
without discharging when the main power of the unit is simply turned off.
Therefore, the remaining voltage must be discharged as described below.
FOR DISCONNECTING THE HARNESS
DISASSEMBLY
Make sure that the flat cable and flexible board are not cracked
of bent at the terminal. Do not insert the cable insufficiently nor crookedly.
When remove a connector, don’t’ pull at wire of connector. It is possible that a wire is snapped.
When installing a connector, don’t’ press down at wire of connector. It is possible that a wire is snapped.
When remove a connector, don’t’ pull at wire of connector. It is possible that a wire is snapped.
When installing a connector, don’t’ press down at wire of connector. It is possible that a wire is snapped.
Follow the disassembly in the numerical order given.
Cabinet (R) block (1-1 to 1-17)
Shoe block (2-1 to 2-2)
VC-478 board (1-1 to 1-7)
MD-134 board (2-1 to 2-9)
Jack (L) unit (3-1 to 3-3)
CABINET (L) BLOCK
Mechanism deck (1-1 to 1-5)
CABINET (R) BLOCK
CK-167 board (1-1 to 1-11)
LCD panel block (3-1 to 3-3)
Control Key block (2-1)
LCD PANEL BLOCK
Hinge block (1-1 to 1-5)
PD-324 board (2-1 to 2-4)
LCD (3-1)
THE METHOD OF ATTACHMENT OF FP-537
FLEXIBLE BOARD
CLICK ON THE PICTURES TO MAGNIFY