Wednesday, 13 March 2019

HOW TO ENTER SERVICE MODE - HYUNDAI H-TV2910 - V-CHIP UNLOCK - MASTER PASSWORD

HOW TO ENTER SERVICE MODE - HYUNDAI H-TV2910 - V-CHIP UNLOCK - MASTER PASSWORD

Service Mode [Factory Mode]_V-Chip unlock_Universal Remote Control Set-up Codes_Circuit Diagram-Full
Used ICsLA72700_LA76933_LA78041_AT24C08 TC4053BP_LV116N__LA76938_LM2052
Universal Remote Control Set-up Codes
TO CHANGE THE PASSWORD
Follow the same steps as the setting up new password. It must be in OFF mode of the V-CHIP function.
MASTER PASSWORD
If you turn on the V-Chip function but failed to remember the password, you can enter the Master Password 1980 to enter into the V-Chip menu.
MPAA RATING
The MPAA film rating system is a system used in the United States and territories and instituted by the Motion Picture Association of America to rate a movie based on its content, being used to decide which movies may be appropriate for children and/or adolescents.
The current MPAA move ratings consist of:
Rated G General Audiences
* Rated PG Parental guidance suggested
* Rated PG-13 Parents strongly cautioned
* Rated R Restricted. Under 17 requires accompanying parent or legal guardian.
* Rated NC-17 & X No 17 and under admitted. Also called Youth Restricted Viewing.
#  Press the V-Chip button to go to the MPAA Rating menu. 
#  Press . +/- and Menu buttons to select.
#  Press the V-Chip button again to return.
CAN.ENG-RATING(Option)
For Canadian English language Rating System, the following seven
Ratings are available.
E : Exempt
C : Children
C8 : Children eight years and older
G : General programming, suitable for all audiences
PG : Parental Guidance
14 : Viewers 14 years and older
18 : Adult Programming
Select each item by the
PROG.+/- buttons, confirm each item the MENU Buttons.
CAN.FRN-RATING (Optional)
EG: Exempt
G: General
8A: General - Not recommended for young children
13A: This issuance may not be suitable for children under 13 years
16A: This issuance is not suitable for under 16
18A: This issuance is reserved for adults
Factory mode [Service Mode]
>> Press “Prod” key to enter the factory menu.
>> Select item by [Prog +] & “Prog [ – ] keys.
>> Adjust the data values by [Vol + ] & [Vol --] keys.
>> Press the “Prod” key to Exit the factory mode.
SCHEMATIC DIAGRAM
CLICK ON THE SCHEMATICS TO ZOOM IN