Master Electronics Repair !

Welcome to Master Electronics Repair! website.Here you will find:Service Modes, Circuit Diagrams,Service manuals, Firmware Update procedure, Disassemble procedure, Universal remote control setup codes, Troubleshooting, Diagnosing, Measuring, and more.... of many of LCD/LED TV/Displays,others various electronic apparates,trough many technical notes and tips/tricks to help repairing/fixing Troubles/ faults,for electrical technicians.This site helps you to save the Earth from electronic waste!

Thursday, 14 March 2019

HOW TO REMOVE DISPLAY PANEL - HP COMPAQ NOTEBOOK NC4000 - SERIES

HOW TO REMOVE DISPLAY PANEL - HP Compaq Notebook NC4000 - Series

DISPLAY ASSEMBLY [12.1-inch TFT XGA with wireless device antennae 325509-001]

Close the notebook and position the notebook so the rear panel faces forward.
Remove the two T8M2.0×8.0 screws that secure the hinge covers to the notebook
Position the notebook so the front faces forward and open the notebook as far as it will open.
Remove the display hinge covers by inserting a flat-bladed tool under the covers and lifting them up. [The hinge covers are included in the Miscellaneous Plastics Kit, spare part number 325528-001.]

Remove the wireless antenna cables [1] and [2]from the routing channel in the top cover [3].

Disconnect the display inverter[1] and video cables [2]from the system board.
Remove the two {T8M2.0×8.0} screws[3]that secure the display assembly to the base enclosure.
Disconnecting the Display Cables and Removing the Display Assembly Screws.
Lift the display assembly straight up and remove it. Reverse the above procedure to install the display assembly.