PANASONIC TC-P32C20P - PEDESTAL ASSEMBLY - DETAILS
SETTING PEDESTAL COVER & STAND
- Setting PEDESTAL COVER and STAND MTG SPACER and BASE PLATE with SCREWS.
- Stick the RUBBER FOOT at bottom ROTATION PLATE.
- Make sure ROTATION PLATE surface fully cover by grease. Follow the picture.
- Setting ROTATION PLATE and BUSH with SCREWS.
Pedestal Assembly 2
- Lay down the unit so that the rear cover faces upward.
- Remove the 4 screws.
- Remove the pedestal.
Click on images to Enlarge
- Remove the 15 screws (A).
- Remove the 2 screws (B),
- Remove the rear cover.
Stand MTG Assembly
- STAND MTG are put in BAG.
- BAG is wrapped around STAND MTG.
- SCREW is put in the BAG and use yellow tape to hold screw bag.
