SAMSUNG CRT TV-WS-32Z30HPQ - SMPS (Power) and Deflection - Circuit Diagram (Schematic)
Samsung WS32Z30 - SLIM CRT TV - Power _ Deflection _ Ass'y Feature box & CRT base card Circuit Diagram.
Universal remote control Set-up codes to check with Samsung brand TVs.
POWER & DEFLECTION ASSY'
CN601 > This is a 4 pin port connected to
the Speaker, and sends the signal from the AMP to the speakers.
CN403 > This is a 8 pin port connected to the CRT Board and supplies 200V, +16V, -16V and Heater voltage.
GT804 > This is a ground port to prevent high voltage due to lighting.
CN802 > This is a 3 pin port connected to the AC power cable. It is connected to the power cable socket.
GT805, GT806 > This is a port connected to the D-Coil surrounding the CRT.
CN403 > This is a 8 pin port connected to the CRT Board and supplies 200V, +16V, -16V and Heater voltage.
GT804 > This is a ground port to prevent high voltage due to lighting.
CN802 > This is a 3 pin port connected to the AC power cable. It is connected to the power cable socket.
GT805, GT806 > This is a port connected to the D-Coil surrounding the CRT.
SCHEMATIC-SMPS
ASSEMBLY FEATURE-BOX
CN07 > This is a 14 pin port connected to the CRT Assy's, and
outputs final R/G/B signals to the CRT Ass'y.
In addition, it outputs the Tilt, VM, and Power signals for the CRT Drive.
CN05 > This is a 4 pin port connected to the Control Ass'y, and receives TV/Video, Menu, Ch Up/Down and Vol -/+ signals.
CN04 > This is a 6 pin port connected to the Master Ass'y, and receives Master Power On/Off, and IR signals.
CN03 > This is a 8 pin port connected to the Side AV, and receives S-Video2 and AV4 external inputs.
CN05 > This is a 4 pin port connected to the Control Ass'y, and receives TV/Video, Menu, Ch Up/Down and Vol -/+ signals.
CN04 > This is a 6 pin port connected to the Master Ass'y, and receives Master Power On/Off, and IR signals.
CN03 > This is a 8 pin port connected to the Side AV, and receives S-Video2 and AV4 external inputs.
CRT DRIVE CARD
GT501, GT502, GT505, GT506 > This is a port connected to the
TBC-Wire and plays the role of CRT ground.
GT503, GT504 > This is a port for countermeasures against compulsory discharges and is connected to the Main Board.
CNC04 > This is a port to receive the R/G/B output signals from the Feature Box.
CNC02 > This is a port that receives power for the CRT and AMP from the Main Board.
FV1 > A port to connect the VM signal to the DY Ass'y.
FN1 > A port to connect signals to the Tilt Coil and is regarded for the screen slant adjustment. URC set-up codes
GT503, GT504 > This is a port for countermeasures against compulsory discharges and is connected to the Main Board.
CNC04 > This is a port to receive the R/G/B output signals from the Feature Box.
CNC02 > This is a port that receives power for the CRT and AMP from the Main Board.
FV1 > A port to connect the VM signal to the DY Ass'y.
FN1 > A port to connect signals to the Tilt Coil and is regarded for the screen slant adjustment. URC set-up codes
0030 0049 0050 0066 0076 0101
0102 0119 0143 0152 0154 0166 0181 0195 0209 0217 0240 0307 0318 0365 0379 0414
0421 0488 0492 0601 0624 0637 0642 0827
If
your set need a 3 digit code; just convert these codes to 3 digits, by
strike out the leading 'Zero' from each code, and try. That is, for
0030, you can check 030; for 0066, you can check 066 etc:
CLICK ON THE PICTURES TO MAGNIFY