SCHNEIDER TFT-LCD TV 26M911 - SERVICE MODE - WHITE BALANCE ADJUSTMENT
When the EEPROM has been replaced, the SVC data should be restored
as the function of individual system and specification
To Enter and exit SVC mode
Note: Into the SVC mode, Initialize with default data.
Note: Into the SVC mode, Initialize with default data.
* Press 5
Seconds MENU buttons on both TV set and Remote Controller at the same time to
get into SVC mode.
* Press
the PR ▲▼ button several times to find SVC Data.
* Input
the corresponding SVC data referring to Table below with the VOL ◀▶ key.
* Press TV/AV button to exit SVC mode.
Factory outgoing setting & Initialize with
default data (into the SVC mode). Do not
change the “( )” items.
WHITE BALANCE CHECKING
CLICK ON THE PICTURES TO MAGNIFY