Sharp HR-GB201 Hard disc recorder - How to install the firmware - how to upgrade the firmware
How to Upgrade the Firmware – How to
install the Firmware – How to format the Hard disc – How to connect the
device to Personal Computer – How to disconnect it from PC – Sharp
PORTABLE JUKEBOX RECORDER HR-GB201 Hard disc recorder.
How to upgrade the firmware
For possible firmware upgrades, visit
our support web site at: “http://sharp-world.com/products/netmd/index.htm”. You
can download firmware files to your PC to upgrade this product.
Caution
When
formatting the hard disc on this product, follow the above procedures.
Do not use other tools such as a disc management tool, a formatting
tool, etc. Functions of this product may be disabled.
1. Turn on the unit.
2. Connect the AC adaptor to the DC+5V socket and place the unit on
the cradle.
3. Connect the unit to a PC with a USB connection cable.
4. After Windows detects this unit as a portable hard disc, copy the
firmware file into this unit‘s ”FIRMWARE” folder.
5. Disconnect the unit from the cradle. • The unit turns off automatically.
6. Turn on the power.
7. The unit turns off automatically. Turn it on to finish the upgrade.
Formatting the hard disc
The
hard disc on this product is partitioned and formatted before shipment
(normally you do not need to format it by yourself). If you
accidentally format the heard disc in other ways, partition and format
it in the following way. Make sure to back up important data beforehand
since all the data on the hard disc will be deleted.
Windows 98 Second Edition/Windows Millennium Edition
1. Connect the unit to a PC with SHARP Music Manager installed.
2. Click the “My Computer” Icon.
3. Use mouse right slick on “SHARP” and then select “Format”.
4. Make sure the label name is “SHARP”.
5. Click “Start”.
6. When formatting is complete please disconnect the unit from the cradle. The unit turns off automatically.
7.
Turn on the unit again, and the unit will automatically create the
system folders which are required to be worked with SHARP Music Manager.
Windows 2000 Professional/ Windows XP
Home Edition/Windows XP Professional
1. Connect the unit to a PC with SHARP Music Manager installed.
2. Click the “My Computer” icon.
3. Use mouse right click on “SHARP” and then select “Format”.
4. Select “FAT32” and make sure the label name is “SHARP”
5. Click “Start”.
6. When formatting is complete please disconnect the unit from the cradle. The unit turns off automatically.
7. Turn on the unit again, and the unit will automatically create the system folders which are required to be worked with SHARP Music Manager.
Caution: When formatting the hard disc on this product, follow the above procedures. Do not use other tools such as a disc management tool, a formatting tool, etc. Function of this product may be disabled.
1. Connect the unit to a PC with SHARP Music Manager installed.
2. Click the “My Computer” icon.
3. Use mouse right click on “SHARP” and then select “Format”.
4. Select “FAT32” and make sure the label name is “SHARP”
5. Click “Start”.
6. When formatting is complete please disconnect the unit from the cradle. The unit turns off automatically.
7. Turn on the unit again, and the unit will automatically create the system folders which are required to be worked with SHARP Music Manager.
Caution: When formatting the hard disc on this product, follow the above procedures. Do not use other tools such as a disc management tool, a formatting tool, etc. Function of this product may be disabled.
How to install the software
Exit all applications before starting the installation.
Insert the supplied CD-ROM into your CD-ROM drive The "Software Installer" screen appears.
Click the "Install SMM" button. The "Welcome" screen appears.
Click the "Next" button. The "Choose Destination Location" screen appears.
Click the "Next" button. The "Set Program Shortcuts" screen appears.
Click the "Next" button.
Click the "Next" button.
When the installation is completed, the "Setup Complete" screen appears.
Click the "Finish" button. Check the "Yes, Launch the program file." box. After installation, SHARP Music Manager starts.
[If
the "Software Installer" screen does not appear in step 1, double click
the "autorun.exe" stored on the CD-ROM from Explorer, etc. When you
use Windows 98 Second Edition, insert the supplied CD-ROM and click the
"Install W98SE Driver" button to install the driver.]
How to connect the unit to a PC
Connect the unit to a PC to transfer audio data.
Turn on the unit
2 Connect the AC adapter to the DC IN 5V socket and place the unit on the cradle.
3 Connect the unit to a PC with a USB connection cable. Connect the
unit to a PC with a USB connection cable. The hard disk access
indicator (green) flashes. Whilst the unit is connected to the PC, the
screen appears.
[It is recommended to use the AC adapter when connecting the unit to a
PC. Otherwise data on the unit may be corrupted when batteries run out.
Do not disconnect a USB connection cable or remove the unit from the
cradle whilst transferring data from a PC. Data on the unit may be
corrupted. The operation buttons on the main unit do not work if it is
connected to a PC. Disconnect the PC to operate on the unit.]
Disconnecting the unit Windows 98 Second Edition
1 Double click "Safely Remove hardware" on the taskbar.
2 Select "TOSHIBA MK2004GAL USB Device", and then click "Stop".
3 Select "TOSHIBA MK2004GAL USB Device", and then click "OK".
4 "The USB Mass Storage Device can now be safely removed from the
system" appears. Click the "OK" button and disconnect the USB connection
cable from the PC.
Windows Millennium Edition
1 Click "Remove Hardware" on the taskbar.
2 Click "USB Disk - Stop Drive".
3 "USB Disk can now be safely removed" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
1 Click "Remove Hardware" on the taskbar.
2 Click "USB Disk - Stop Drive".
3 "USB Disk can now be safely removed" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
Windows 2000 Professional
1 Click "Unplug or eject hardware" on the taskbar.
2 Click "USB Mass Storage Device - Stop Drive".
3 "USB Mass Storage Device can now be safely removed" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
1 Click "Unplug or eject hardware" on the taskbar.
2 Click "USB Mass Storage Device - Stop Drive".
3 "USB Mass Storage Device can now be safely removed" appears. Click the "OK" button and disconnect the USB connection cable from the PC.
Windows XP Home Edition/Professional
1 Click "Safely Remove Hardware" on the taskbar.
2 Click "Safely remove USB Mass Storage Device - Drive(*:)".
3 "Safe To Remove Hardware" appears. Click the message and disconnect the USB connection cable from the PC.
1 Click "Safely Remove Hardware" on the taskbar.
2 Click "Safely remove USB Mass Storage Device - Drive(*:)".
3 "Safe To Remove Hardware" appears. Click the message and disconnect the USB connection cable from the PC.
SYMPTOM: Unit fails to operate permanently or intermittently.
CAUSE: Ribbon cable to the HDD.
ACTION:
Replace the HDD ribbon cable using the part number below. Ensure that
the replacement procedure outline below is followed when replacing the
ribbon cable.
FPC cable kit => 9JC20203010010
Name Plate Right => 9JCE7830113011
Name Plate Left => 9JCE7830114011
To
remove the casing, it is necessary to carefully pries off the two
metallic strips (items A1 in the picture below). This is best carried
out by heating gently with hot air and sliding a sharp object such as a
craft knife underneath to break the seal. It will then be possible to
remove the four securing screws (items A2) to allow further dismantling
of the cabinet.
[Note that the two metallic strips are very fragile and can break very easily. The part number for these items is shown above.]