HOW TO ENTER SERVICE MODE - SONY KDL-22/26EX550,553,555,32EX650,653,655
KDL-22/26EX550,553,555,32EX650,653,655(AEP/UK/IT)
Following S/N Range is for (BCN)
1,000,001-1,950,000
Service Mode_V-Com adjustment_White balance adjustment_set to Shipping Condition.
SERVICE MODE
* Turn on the main power switch to place this set in standby mode.
* Press the buttons on the remote commander as follows, and entering service mode.
* Press the buttons on the remote commander as follows, and entering service mode.
DISPLAY > CHANNEL-5 > VOLUME + > TV POWER
Service mode display.
Note: First of all, when you enter Service Mode, you can see “Digital” service mode. Whenever you press “OPTIONS” or “JUMP” on remote, each service mode is changed. “Digital” > “Chassis” > “VPC”.
Note: First of all, when you enter Service Mode, you can see “Digital” service mode. Whenever you press “OPTIONS” or “JUMP” on remote, each service mode is changed. “Digital” > “Chassis” > “VPC”.
USING THE REMOTE CONTROL IN SERVICE MODE
After entering service mode, then turn off the power switch.
CHANGING THE DATA VALUES
Note: “Digital” service mode don’t have to Save. (except“002 MODEL” and
“005 CHPRSET” category)
1. Change Data of“Digital”service mode. (except“003 DIG_SRV_MODE” category)
a. Press “2 / 5” on remote to select (up / down) category.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “3 / 6” on remote change (up / down) data.
1. Change Data of“Digital”service mode. (except“003 DIG_SRV_MODE” category)
a. Press “2 / 5” on remote to select (up / down) category.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “3 / 6” on remote change (up / down) data.
2. Change Data of“Digital”service mode. (“003 DIG_SRV_MODE”category)
“003 DIG_SRV_MODE” is one category of “Digital” service mode.
Please note because this operation is special.
a. Press “2 / 5” on remote to select “003 DIG_SRV_MODE”.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
d. Press number key “1”~”9” directly. “*” stamp move.
e. Press “12 / enter / select” to decide and advance next step. Press “return”, when returning on the previous page.
“003 DIG_SRV_MODE” is one category of “Digital” service mode.
Please note because this operation is special.
a. Press “2 / 5” on remote to select “003 DIG_SRV_MODE”.
b. Press “1 / 4” on remote to select (up / down) Item.
c. Press “0 / 10” on remote to select item.
d. Press number key “1”~”9” directly. “*” stamp move.
e. Press “12 / enter / select” to decide and advance next step. Press “return”, when returning on the previous page.
TO SAVE THE CHANGED DATA
1. Write data for“Chassis”or“VPC”service mode
a. Press “Mute” on remote. It shows green “SERVICE” changes to green “WRITE”.
b. Press “0” or “enter” on remote. Green “WRITE” changes to red “WRITE”. It indicates writing is processing.
c. After a while, red “WRITE” changes to green “SERVICE”. Writing process is done at this point.
2. TV reboot is necessary for applying data change.
a. Press “Mute” on remote. It shows green “SERVICE” changes to green “WRITE”.
b. Press “0” or “enter” on remote. Green “WRITE” changes to red “WRITE”. It indicates writing is processing.
c. After a while, red “WRITE” changes to green “SERVICE”. Writing process is done at this point.
2. TV reboot is necessary for applying data change.
WHITE BALANCE ADJUSTMENT
Note: execute this adjustment if necessary.
Change Data of“VPC”service mode. (“006 WB”category)
a. Press “1” or “4” on remote to select WB adjustment menu.
b. Change data by pressing “3” or “6”. Each range of these items is 0~255.
c. Press “mute” + ”0” on remote to save the data. “SERVICE” comment is changed to “WRITE”, indicating writing process.
d. After a while, “WRITE” comment returns to “SERVICE”, which means writing process is done.
Change Data of“VPC”service mode. (“006 WB”category)
a. Press “1” or “4” on remote to select WB adjustment menu.
b. Change data by pressing “3” or “6”. Each range of these items is 0~255.
c. Press “mute” + ”0” on remote to save the data. “SERVICE” comment is changed to “WRITE”, indicating writing process.
d. After a while, “WRITE” comment returns to “SERVICE”, which means writing process is done.
VCOM ADJUSTMENT
Note: Execute this adjustment if necessary.
1. Change Data of“VPC”service mode.
a. Select“002 VCOM”category by pressing “2 / 5” on remote.
b. Select “000 ENABLE” item bypressing “1 / 4” on remote.
c. Change ENABLE from “0” to “1” to enable VCOM adjustment.
1. Change Data of“VPC”service mode.
a. Select“002 VCOM”category by pressing “2 / 5” on remote.
b. Select “000 ENABLE” item bypressing “1 / 4” on remote.
c. Change ENABLE from “0” to “1” to enable VCOM adjustment.
d. Select“002 VCOM”category by pressing “2 / 5” on remote.
e. Select “001 ADJUST” item by pressing “1 / 4” on remote.
f. Change data by pressing “3 / 6” on remote controller.
g. Finish the adjustment when the picture seems OK.
e. Select “001 ADJUST” item by pressing “1 / 4” on remote.
f. Change data by pressing “3 / 6” on remote controller.
g. Finish the adjustment when the picture seems OK.
{Every
time the data changed by pressing “3 / 6” Key, the VCOM pattern will display
for 5s and in the mean time OSD will disappear, After the 5s period, VCOM
pattern will disappear and OSD will display again. The 5s time can be adjust by data change.
If pressing the “3/6” key again during the 5s period, the VCOM pattern display time will be extended to another 5s.}
If pressing the “3/6” key again during the 5s period, the VCOM pattern display time will be extended to another 5s.}
TO SET THE SHIPPING CONDITION
* Move to“Digital”service mode.
* Press “8” on remote.
* It shows green “SERVICE” changes to green “RST-”.
* Press “mute” on remote. Added green “EXE” after green “RST-”.
* Press “0” on remote. Green “EXE-RST” changes to red “EXE-RST”. It indicates writing is processing. After a while, red “EXE-RST” changes to green “SERVICE”. And all LED lights.
Writing process is done at this point.
* Press “8” on remote.
* It shows green “SERVICE” changes to green “RST-”.
* Press “mute” on remote. Added green “EXE” after green “RST-”.
* Press “0” on remote. Green “EXE-RST” changes to red “EXE-RST”. It indicates writing is processing. After a while, red “EXE-RST” changes to green “SERVICE”. And all LED lights.
Writing process is done at this point.
You can set to shipping condition w/o entering Service Mode.
> “Cursor Up” on remote + “Power Key” on Front panel.
> “Cursor Up” on remote + “Power Key” on Front panel.