SONY WEGA KV-36FS12, KV36FS13, KV-36FS16, KV-36FS17 - TRANSPARENT BAR IN PICTURE
TRANSPARENT BAR IN PICTURE
- With a signal applied to the “S” Input of Video 1, while viewing a component signal connected to the Video 4 input. A transparent bar that travels across the screen can be seen.
- Add two jumpers to the UY board. Use 24AWG-insulated wires as follows:
- D238 Anode to R1215 ground side.
- D201 Anode to C1205 ground side.
Add jumper between R1215 & Anode of D238
- R1215 (Ground side) à G-7 Board.
- D238 (Anode side) à G-7 Board
Add jumper between C1205 Ground side & D201 Anode side.
- C1205 (Ground side) à H-8 Board
- D201 (Anode side) à G-7 Board.