SERVICE MODE - DAYTEK LC2018NT Digital Flat Display - POWER SUPPLY SCHEMATIC
Enter
factory mode adjustment using the remote control.
* Press
Menu button once first
* Then
press PRE.CH (or named RECALL) button five times, and you can see manufacture
menu on the LCD panel.
* Press
the Channel[ +/-] button to selection the sub menu of factory menu（ including
F, E, UOCⅢ, RGBTemp, Temp and press the
Volume + to enter the sub menu and setting the value.
* Press
the MUTE button again and again or turn off the TV, it can exit the factory
menu.
UNIVERSAL REMOTE CONTROL SET-UP CODES TO CHECK WITH DAYTEK TVs:
0194 0655 0658 0720
POWER SUPPLY SCHEMATIC {Click on the schematic to Zoom In}
