HOW TO ENTER SERVICE MODE and ADJUST DATA VALUES - SONY XBR-SERIES LCD TVS
APPLICABLE TO SONY - XBR-40LX900/46LX900/52LX900/60LX900
TV must be in Standby Mode. (POWER Off).
Press the following buttons on the Remote Commander within a
second of each other:
{DISPLAY > CHANNEL-5 > VOLUME (+) > POWER}
Use the Remote Commander to view the Digital, Chassis and
Sub Service Menus and their options.
* To display the Service Menu that contains the Category you want
to adjust, press JUMP or OPTIONS on the Remote Commander.
USING THE REMOTE COMMANDER TO VIEW OR CHANGE SERVICE DATA
* Use the buttons on the Remote Commander to access the
Service Menu items and adjust the Data Values.
* To change the Category, press 2 to move to the Next Category
or press 5 to go back to the Previous Category.
Note: Pressing 2 or 5 only changes the Categories within the
Service Menu displayed.
* To change the adjustment item, press 1 to move to the Next
Item or 4 to go back to the Previous Item.
* To change the Data Value, press 3 to increase the Data Value
or 6 to decrease the Data Value.
* Press MUTING then press 0 to Write the changes.
* To exit service mode, press HOME or turn the TV power off.