HOW TO REMOVE THE INVERTER BOARD - SONY KDL-40XBR4 40XBR5 46XBR4 46XBR5

HOW TO REMOVE the INVERTER BOARD - SONY KDL-40XBR4_40XBR5_46XBR4_46XBR5

How to remove & replace the Inverter Board _ Sony KDL-40XBR4_40XBR5_46XBR4_46XBR5

MT INVERTER BOARD(S) REMOVAL

Be sure to identify the inverter cover screws before proceeding. 

DO NOT remove the screws securing the plastic strip holding the lamp sockets.

Remove screws securing the inverter cover.

Remove screws securing the inverter board.

REPLACING THE INVERTER CONNECTOR ASSEMBLY

After inserting the connector into the Inverter board, push the middle section of the inverter connector to lock on the terminal.

Push the right section of the inverter connector and confirm it is securely connected.

Push the left section of the inverter connector and confirm it is securely connected.