Kindle Fire HD 8.9 – How to replace the battery
BATTERY REPLACEMENT PROCEDURE
Remove the SIM card tray (if
present in your model).
Insert a large plastic opening
tool next to the Kindle's headphone jack.
Make sure the notch on the plastic opening tool is facing the back of the Kindle.
Move the plastic opening tool evenly around the Kindle, separating the two halves.
Be careful not to completely separate the rear cover. There are two delicate flex cables that connect the display assembly to the motherboard.
Make sure the notch on the plastic opening tool is facing the back of the Kindle.
Move the plastic opening tool evenly around the Kindle, separating the two halves.
Be careful not to completely separate the rear cover. There are two delicate flex cables that connect the display assembly to the motherboard.
Set the Kindle down on the rear case.
Holding the display assembly near the
camera, carefully open the display assembly up to about 90 degrees
from the rear case.These images show the Kindle laying flat. In order to
prevent damage to the flex cables, keep the Kindle open at 90 degrees
while disconnecting the display assembly.
Lift the retaining flap on the
ZIF connector of the upper flex cable.
Gently pull the cable out of its
socket.
This flex cable is delicate. Be careful not to crease or bend it while working.
This flex cable is delicate. Be careful not to crease or bend it while working.
Lift the retaining flap on the
ZIF connector of the lower flex cable.
Gently pull the flex cable from
its socket.
This flex cable is delicate. Be careful not to crease or bend it while working.
This flex cable is delicate. Be careful not to crease or bend it while working.
Separate the display assembly from the
rest of the device.
When reassembling the device,
align the two halves of the case before connecting the flex cables.
Remove the following sixteen
screws from the metal midframe on the rear of the device:
One 3 mm Phillips screw from each
corner
Four 3 mm Phillips screws surrounding the camera
Eight 3 mm Phillips screws from the body of the midframe
Four 3 mm Phillips screws surrounding the camera
Eight 3 mm Phillips screws from the body of the midframe
Carefully remove the metal
midframe.
For easier handling, position the
Kindle as shown.
Lift up on the silver ends of the
black flex cable that lays across the battery.
Gently pull the black flex cable from the battery.
Gently pull the black flex cable from the battery.
Disconnect the orange button
cable from its socket on the motherboard.
Don't remove the button from the device.
It is adhered to the case and may tear during removal.
Starting at the outside edge of
the battery, use the flat edge of a spudger to separate the battery from
the rear of the device.
Work carefully. Excessive force
on battery may cause it to bend, break, or crack.
Move the spudger along each side of the battery, prying upwards with even pressure.
As the adhesive releases, push the spudger further underneath the battery.
Once half of the battery is detached, pry the other half in the same manner.
Remove the battery assembly from the Kindle.
Move the spudger along each side of the battery, prying upwards with even pressure.
As the adhesive releases, push the spudger further underneath the battery.
Once half of the battery is detached, pry the other half in the same manner.
Remove the battery assembly from the Kindle.