VCOM and FLICKER ADJUSTMENT - LG 42LA62xx _ LG42LA62xx-T LCD TV
LG 42LA62xx _ LG42LA62xx-T North/Latin America, Europe/Africa, Asia/Oceania
(CHASSIS : LB33B)
HOW TO ADJUST V- COM, FLICKER _ No response to remote
control.
No response in remote controller, key error, VCOM Adjustment (Flicker)
Remote controller operation checking method.
1, 2. Check IR cable condition between IR & Main board.
3. Check the St-by 3.5V on the terminal 4.
4. When checking the Pre-Amp when the power is in ON
condition, it is normal when the Analog Tester needle moves slowly, and
defective when it does not move at all.
VCOM Adjustment. Sequence
of the V-com adjustment.
Case
LCD module change.
T-Con board change.
Equipment
Service Remote controller.
Adjust sequence
* Press the ‘adj’ key
* Select V-COM
* As pushing the right
or the left button on the remote controller, and find the V-COM value which is
no or minimized the Flicker. (If there
is no flicker at default value, Press the exit key and finish the VCOM
adjustment.)
Push the OK key to store the value. Then the message “Saving
OK” is pop.
Press the exit key to finish V-COM adjustment.
Service (Adjust) Remote Control
