LG-P970 – Disassembling procedure – How to replace the touch screen
Remove the back cover
Remove
the battery
Remove
the SIM card
Remove
the µSD card (Memory)
Remove
7 screws on the back
With
a tool start to open the back frame
And
it's now easy to remove the back frame with hand, carefully.
Remove
buttons
Locate
the back camera
With
a tool raise up the led carefully
With
a tool disconnect the back camera
And
remove the camera with your fingers.
Don’t
forget to remove the little connector of screen, with a tool, right next to the
empty slot of the camera.
It's
time to remove carefully the tactile screen.
Don’t
scratch le LCD.
The
touch panel is glued with double-sided tape. You can remove it with your
fingers.
Careful
with the touch screen connector. cut new double sided tape (1-2mm width), put
it on the edges and peel it.
Remove
the inside protection on the new touch screen. carefully put the news touch
screen on the LG. Take care that the connector goes right through the right
hole.
To
finish, add all part by reading these instructions in reverse.