HOW TO ENTER SERVICE MODE - PANASONIC TX-L32S20E - TX-LF37S20 - LCD TV
APPLICABLE TO - PANASONIC LCD TV - TX-L32S20E _ TX-L32S20L _ TX-LF32S20 _ TX-L32S20ES _ TX-L37S20E
_ TX-L37S20L _ TX-LF37S20 _ TX-L37S20ES
MPU controls the functions switching for each IICs through
IIC bus in this chassis. The following setting and adjustment can be adjusted
by remote control in Service Menu.
How to enter SERVICE
* While pressing ( - / v )button on TV unit, press on the remote control for 3 times within 2
seconds.
* To exit from Service mode, press the exit button on remote
control.
Key Command
* Press the 3 or 4 button to change the adjustment values or
function.
* Press the 1 or 2 button to step up/down through the
functions and adjustments
* Press the numerical button VOLUME ( +/- ) to change option
item.
* Press the OK button after each adjustment has been made to
store the required values.
Service Tool Mode
To access
1 Select [SRV-TOOL] in Service Mode.
2 Press [OK] button on the remote control.
Display of SOS History
SOS History (Number of LED blinking) indication.
From left side; Last SOS, before Last, three occurrence
before, 2nd occurrence after shipment, 1st occurrence
after shipment.
This indication will be cleared by [Self/check indication
and forced to factory shipment setting].
Power ON Time, On/Off
Note: To display TIME/COUNT menu, highlight position, then
press MUTE for 3sec.
Time: Cumulative power on time, indicated hour: minute by
decimal.
On/Off: Number of On/Off switching by decimal.
Note: This indication will not be cleared by either of the
self-checks or any other command.
Exit
Disconnect the AC cord from wall outlet or switch off the
power with [Power] button on the main unit.
CLICK ON THE PICTURES TO ZOOM IN
Hotel Mode
Purpose > To Restrict
a function for hotels.
To Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu, enter the
following command (within 2 second).
[TV] : Vol.[Down] + [REMOTE] : AV (3 times)
The Hotel mode setup menu is displayed.
To exit the Hotel mode setup menu; Disconnect AC power
cord from wall outlet.
The Hotel Mode Set-up Menu
