Pioneer Digital Media Receiver MVH 08UBG – error codes – circuit diagram
Pioneer DIGITAL MEDIA RECEIVER - MVH-08UBG/XEUW5, MVH-08UB/XEUW5, MVH-85UB/XEES, MVH-88UB/XFBR: Made for iPod and iPhone
ERROR CODE LISTCommon
AMP ERROR
This unit fails to operate or the speaker connection is incorrect.
The protective circuit is activated.
*Check the speaker connection.
*Check the power IC and its peripheral circuit.
USB device
NO AUDIO
There are no songs.
*Transfer the audio files to the USB device and connect.
The connected USB device has security enabled.
*Follow the USB device instructions to disable the security.
SKIPPED
The connected USB device contains DRM protected files.
*The protected files are skipped.
PROTECT
All the files on the connected USB device are embedded with DRM.
*Replace the USB device
N/A USB
The connected USB device is not supported by this unit.
*Disconnect your device and replace it with a compatible USB device.
CHECK USB
The USB connector or USB cable has short-circuited.
*Check that the USB connector or USB cable is not caught in something or damaged.
The connected USB device consumes more than maximum allowable current.
*Disconnect the USB device and do not use it. Turn the ignition switch OFF and back to ACC or ON. Connect only compliant USB devices.
ERROR-19
Communication failed.
*Perform one of the following operations, then return to the USB source.
• Turn the ignition switch OFF and back to ON.
• Disconnect the USB device.
• Change t
ERROR-23
USB device was not formatted properly.
*Format the USB device with FAT12, FAT16 or FAT32.
Circuit diagram [Schematic]
