SONY KDL 26M4000 BRAVIA LCD TV - POWER SUPPLY SCHEMATIC (CIRCUIT DIAGRAM) - RESET TO FACTORY MODE

KDL 26M4000 SONY BRAVIA LCD TV - POWER SUPPLY SCHEMATIC (Circuit Diagram) - Reset to Factory Mode

 SCHEMATIC_POWER

PWB_COMPONENT SIDE & FOIL SIDE

CLICK ON THE PICTURES TO ZOOM IN

RESET TO FACTORY MODE

1)  TV must be in standby mode. (Power off).

2) Press the following buttons on the Remote Commander within a second of each other:

DISPLAY ==> Channel 5 ==> Volume + ==>  TV POWER.

The Self Check list displays.    

This is the SAME as accessing Service Adjustments.

Results for all of the following diagnostic items are displayed at the bottom of the screen. No error has occurred if the screen displays a “0”.

3)  From the Self Diagnostic screen, select Factory Default button and then select Yes.

4)  To start Auto Program, select Yes.

 NOTE: Allow 30+ minutes for Auto Program to complete.

5)  Using the customer’s information, reset their adjustments.