Monday, 30 December 2019

REPAIR / SERVICING TV SAMSUNG T24E310EX

Technical description and composition of the SAMSUNG T24E310EX TV, panel type and applicable modules. The composition of the modules.
SAMSUNG LED
Model: T24E310EX
Chassis / Version: NA02
Panel: V236BJ1-LE2 REV.C7
LED backlight: TREM11 27 leds
LED driver (backlight): integrated into MainBoard
Power Supply (PSU): Adapter
MainBoard: BN41-02337B
IC MainBoard: S25C25, DRV612, 25Q40CLS, F59L1G81MA-25TI, K4B2G16, NTP7415
Tuner: BN40-00287B GT2CX-33X264B / FN-FNS
Technical Specifications T24E310EX
SAMSUNG T24E310EX
General repair guidelines for TV LCD LED
Possible malfunctions
- SAMSUNG T24E310EX TV does not turn on, does not respond to the remote control and control panel buttons, indicators do not light up and do not blink.
Usually with such manifestations, the defect is caused by faulty elements in the main adapter power supply module.
The external adapter power supply is not always subject to repair, especially since the owner can purchase it independently. But, in some cases, it makes sense to open it and eliminate the simple typical defects inherent in converters in pulsed sources. It is necessary to measure its output voltages, and in case of their absence (full or partial), it is necessary to check the serviceability of the power switches of the converters and rectifier diodes for the presence of a possible short circuit.
In case of breakdowns in the secondary circuits, the converter, as a rule, can emergency work in the short circuit mode, and during short circuit in the power elements of the primary circuit, the mains fuse usually breaks.
The breakdown of power switches (MosFet) in pulsed sources is sometimes caused by malfunctions of other circuit elements, for example, in circuits supplying a PWM controller, frequency-setting or damper ones, as well as in negative feedback (OOS) stabilization circuits. PWM controllers (PWM), if they do not have visible damage to the chassis and open short circuit between the terminals, are usually checked by replacement.
- There is no image, there is sound, it responds to the remote. Or the image may appear for a second when turned on and immediately disappears.
Failure in most such cases is detected in the nodes and backlight elements of the LED panel. The reason can be both in the power supply of the LEDs, in their serviceability (breakdown or breakage), as well as in the violation of the contact connections of the LED strips.
When trying to identify a break in the LED lines, it should be borne in mind that it is difficult to do this without disassembling the panel. For example, a current source is needed to open PN junctions connected in series.
- The TV does not turn on, does not respond to the remote control. The indicator blinks or signals standby mode.
Repair or diagnostics of the BN41-02337B motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, you should update or replace the software (software). Complex repair of MB (SSB) is possible only in the conditions of a service center with the necessary equipment. Checking or replacing elements S25C25, DRV612, 25Q40CLS, F59L1G81MA-25TI, K4B2G16, NTP7415 requires the necessary training and professional skills in repairing modules at the component level. Problems associated with the use of BGA soldering technologies can sometimes be diagnosed by warming up.
Before changing the tuner BN40-00287B GT2CX-33X264B / FN-FNS, if it is not possible to tune to television channels, make sure that there are supply voltages, which must be measured at the corresponding terminals of the tuner and checked for correctness. The pulses of the data exchange of the tuner with the processor can be controlled by an oscilloscope
Attention TV owners! Attempts to self-repair SAMSUNG T24E310EX are not recommended by the manufacturer and can lead to serious negative consequences!


The appearance of the MainBoard BN41-02337B is shown in the figure below:
BN41-02337B
Main features of the SAMSUNG T24E310EX device:
Installed matrix (LED panel) V236BJ1-LE2 REV.C7.
To power the backlight LEDs, a converter is used, combined with the main board BN41-02337B.
To power all internal components of the SAMSUNG T24E310EX TV, an external adapter type source is used.
MainBoard - the main board (motherboard) is a BN41-02337B module, using chips S25C25, DRV612, 25Q40CLS, F59L1G81MA-25TI, K4B2G16, NTP7415 and others.
The tuner BN40-00287B GT2CX-33X264B / FN-FNS provides the reception of television programs and tuning to channels.
Additional technical information about the panel:
Brand: CHIMEI INNOLUX
Model: V236BJ1-LE2
Type: a-Si TFT-LCD, Panel
Diagonal size: 23.6 inch
Resolution: 1366x768, WXGA
Display Mode: Super MVA, Normally Black, Transmissive
Active Area: 521.471x293.184 mm
Surface: Antiglare (Haze 1%), Hard coating (3H)
Brightness: 250 cd / m²
Contrast Ratio: 3000: 1
Display Colors: 16.7M (8-bit), CIE1931 72%
Response Time: 8.5 (G to G)
Frequency: 60Hz
Lamp Type: WLED Without Driver
Signal Interface: LVDS (1 ch, 8-bit), 30 pins
Voltage: 12.0V