Technical description and composition of the SAMSUNG LE40A856S1M TV, panel type and applicable modules. The composition of the modules.SAMSUNG
Model: LE40A856S1M
Chassis / Version: SQ01
Panel: V400H1-L01
Inverter (backlight): T87I034.02 0
Power Supply (PSU): BN44-00199A IP-211135A
PWM Power: FAN7530, QM853 STM4472, FSQ0765RG, LX1692BIDW, 74VHC123A
MainBoard: BN41-01063B BN94-02102D
IC MainBoard: WT61P8, SIL9185CTU
Tuner: BN40-00126A
Control: IR: BN41-00922A
Technical Specifications LE40A856S1M
SAMSUNG LE40A856S1M
General repair guidelines for TV LCD
Possible malfunctions
- SAMSUNG LE40A856S1M TV does not turn on at all. There is no reaction to the remote control and control buttons from the front panel. Indicator lights do not light or flash.
Failure in such cases should begin to be sought in the power supply circuits BN44-00199A. It is necessary to measure its output voltages, and in case of their absence (full or partial), it is necessary to check the serviceability of the power switches of the converters and rectifier diodes for the presence of a possible short circuit.
In case of breakdowns in the secondary circuits, the converter, as a rule, can emergency work in the short circuit mode, and during short circuit in the power elements of the primary circuit, the mains fuse usually breaks.
The breakdown of power switches (MosFet) in pulsed sources is sometimes caused by malfunctions of other circuit elements, for example, in the circuits supplying the PWM controller, frequency-setting or damper ones, as well as in the circuits of Negative Feedback (OOS) stabilization. PWM controllers (PWM) FAN7530, QM853 STM4472, FSQ0765RG, LX1692BIDW, 74VHC123A, if they do not have visible damage to the chassis and open fault between the terminals, are usually checked by replacement.
- There is no image, there is sound, it responds to the remote control, the channels are switched. In some cases, the image appears when you turn on and immediately disappears.
The defect can be caused by problems in the nodes or elements of the backlight of the display, or in the power supply of the lamps or the inverter.After checking all the electrolytic capacitors of the filters that are involved in the power supply of the inverter, you must ring in its converter power keys for breakdown and secondary windings of transformers for an open.
If in diagnosing a malfunction, it is necessary to disable the inverter protection, there is a risk of failure of the power elements of the inverter, and special care is required during operations, and after their completion, it is necessary to restore the protection circuits for further safe operation of the TV by the owner in normal mode.
- The indicator on the front panel blinks, the TV does not turn on in the operating mode, it does not respond to the remote control.
Repair or diagnostics of the BN41-01063B motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, you should update or replace the software (software). In cases of attempts to repair the MB (SSB) board, it is necessary to check the serviceability of its elements - WT61P8, SIL9185CTU which may require replacement with new ones. If the BGA processor is installed, there is a possibility of a violation of the soldering of the contacts of its conclusions with the board (it is diagnosed by heating).
The malfunction of the tuner BN40-00126A is established after checking the software and all supply voltages at its terminals. The data exchange of the tuner with the processor via the I2C bus can be controlled by an oscilloscope.
We recommend LE40A856S1M TV owners for repair to contact only qualified specialists with the necessary work experience! Attempts to repair it yourself without the appropriate knowledge and skills can lead to irreversible negative consequences!
PSU SCHEMATICS Samsung -------> BN44-00199A Power supply.
The appearance of the MainBoard BN41-01063B is shown in the figure below:BN41-01063B
The appearance of the power supply
Main features of the SAMSUNG LE40A856S1M device:
Installed matrix (LCD panel) V400H1-L01.
To power the backlight used inverter T87I034.02.
The necessary supply voltages for all nodes of the SAMSUNG LE40A856S1M TV are generated by the BN44-00199A power supply module or its analogs using FAN7530, QM853 STM4472, FSQ0765RG, LX1692BIDW, 74VHC123A microcircuits.
MainBoard - the main board (motherboard) is a BN41-01063B module, using WT61P8, SIL9185CTU chips and others.
The tuner BN40-00126A provides the reception of television programs and tuning to channels.
Additional technical information about the panel:
Brand: CHIMEI INNOLUX
Model: V400H1-L01
Type: a-Si TFT-LCD, Panel
Diagonal size: 40 inch
Resolution: 1920x1080, FHD
Display Mode: Super MVA, Normally Black, Transmissive
Active Area: 885.6x498.15 mm
Surface: Antiglare (Haze 25%), Hard coating (3H)
Brightness: 530 cd / m²
Contrast Ratio: 1800: 1
Display Colors: 16.7M (8-bit), CIE1931 72%
Response Time: 6.5 (G to G)
Frequency: 60Hz
Lamp Type: 20 pcs CCFL Embedded (Balance board)
Signal Interface: LVDS (2 ch, 8-bit), 51 pins
Voltage: 12.0V