Master Electronics Repair !: SAMSUNG UN19D4003BD, UN26D4003BD LCD TVS HOW TO UPDATE THE FIRMWARE / SOFTWARE, WIRING DIAGRAM, CONNECTOR FUNCTIONS

Samsung LED LCD TV UN19D4003BD, UN26D4003BD, UN32D4003BD, UN22D5003BF, UN40D5003BF, LN32D40*E*D wiring diagram how to update the software, version check and more - U59C and U59E chassis

How to Upgrade SW and Micom

Insert a USB drive containing the firmware upgrade downloaded from samsung.com into the TV.

Be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete (the new version will have a higher number than the older version). When software is upgraded, video and audio settings you have When software is upgraded, video and audio settings you have you write down your settings so that you can easily reset them after the upgrade.

Main SW upgrade

1. Store the software program named "T-MX5FAUSC"(FHD) or "T-MX5HAUSC"(HD) in USB memory stick.

Connect the USB.

2. Click the MENU key in remote controller.

3. Select Support menu.

Locate the menu cursor Software Upgrade menu.

4. Click the ENTER key.

5. Click the ENTER key. - Wait for upgrade complete and check the SW version.

How to check the SW version

Software Upgrade can be performed by downloading the latest firmware from samsung.com to a USB memory device. Current Version - the software already installed in the TV.

Note : Software is represented as ‘Year/Month/Day-Version’

How to check the SW version

Use the main menu
1. Click the “menu” key in remote controler.
2. Select Support menu.
3. Locate the menu cursor “Software Upgrade” menu.
4. Click the “info” key.
5. Check the Main SW and Micom version.