Monday, 3 August 2020

REPAIRING / SERVICING TV SUPRA STV-LC32LT0020W

Technical description and composition of the SUPRA STV-LC32LT0020W TV, panel type and modules used. The composition of the modules.
SUPRA LED
Model: STV-LC32LT0020W
Chassis / Version: TP.MS3463S.PB801 / V1S06
Panel: C320X16-E60-H
LED backlight: RF-AB320E30-0601S-10 A7
T-CON: MT3151A05-5-XC-9 ST3151A05-8
LED driver (backlight): integrated into MainBoard
PWM LED driver: SN51DP
Power Supply (PSU): integrated into MainBoard
PWM Power: PWM SOT23-6
MainBoard: TP.MS3463S.PB801
IC MainBoard: CPU: MSD3463GU, SPI Flash: GD25Q64, AUDIO: OB6220VP
Tuner: XF-3SDT-H (R840)
Control: IR: JUC7.820.00184405
STV-LC32LT0020W Specifications
SUPRA STV-LC32LT0020W
General recommendations for TV LCD LED repair
Possible malfunctions
- SUPRA STV-LC32LT0020W TV does not turn on, does not respond to the remote control and control panel buttons, the indicators are off or flashing.
First of all, in such cases, you should make sure that the common switching power supply (SMPS) - the AC / DC voltage converter of the mains voltage - is working. All source elements in this TV model are located on the MainBoard TP.MS3463S.PB801. It is necessary to make sure that its output voltages are present and, if they are completely absent, check the power switches and rectifier diodes for a possible short circuit.
In case of breakdowns in the secondary circuits, the converter, as a rule, can operate in an emergency in the short-circuit mode, and in the event of a short circuit in the power elements of the primary circuit, the mains fuse is usually cut off.
Breakdown of power switches (MosFet) in switching sources is sometimes caused by malfunctions of other circuit elements, for example, in the circuits supplying the PWM controller, frequency setting or damper, as well as in the circuits of Negative Feedback (OOS) stabilization. PWM controllers (PWM) PWM SOT23-6, if they have no visible damage to the case and an open short circuit between the pins, are usually checked by replacing.
- There is no image, there is sound, it reacts to the remote control. Or the image may appear for a second when turned on and disappear immediately.
The malfunction in most of these cases is found in the nodes and elements of the LED panel backlighting. The reason may be both in the power supply of the LEDs, in their serviceability (breakdown or breakage), as well as in the violation of the contact connections of the LED strips.
To identify an open circuit in the LED lines without disassembling the panel, a current source is required. It is impossible to open the junctions connected in series with a simple multimeter; a voltage of several tens of volts is required.
- The TV does not turn on, the indicator signals standby or operating mode, or blinks.
Repair or diagnostics of the TP.MS3463S.PB801 motherboard should begin with checking the stabilizers and power converters necessary to power the microcircuits and matrix. If necessary, you should update or replace the software (software). Often the MB (SSB) board needs to be replaced in case of complex malfunctions that are difficult to detect. When trying to repair, you should check its elements - CPU: MSD3463GU, SPI Flash: GD25Q64, AUDIO: OB6220VP and replace the failed chips with new ones. Some malfunctions may be associated with the use of BGA soldering technologies in modern Main Board. Typically, such defects are detected by local heating of the chip.
If there is no tuning for terrestrial or cable TV channels, you should make sure that the software is correct, as well as that the supply voltages on the terminals of the XF-3SDT-H (R840) tuner match. It is also necessary to check with an oscilloscope the presence of pulses of data exchange between the tuner and the processor via the I2C bus.
Owners and users of the SUPRA STV-LC32LT0020W TV should remember that self-repair without special knowledge, skills and qualifications can be fraught with negative consequences that can lead to complete non-repairability of the device!

DOWNLOAD SCHEMATIC DIAGRAM  / SERVICE MANUAL +  Trouble Shooting ------------------>    Chassis TP.MS3463S.PB801


DOWNLOAD FIRMWARE FOR SPI FLASH  ----------->   SUPRA STV-LC32LT0020W version V1S06, Main: TP.MS3463S.PB801, Panel: C320X16-E60-H


DOWNLOAD FIRMWARE FOR SPI FLASH  ----------->   SUPRA STV-LC32LT0020W version V4T09, Main: JUC7.820.00208835, Panel: ST3151A05-8


DOWNLOAD FIRMWARE FOR SPI FLASH  ----------->   SUPRA STV-LC32LT0020W version V2S10, Main: JUC7.820.00188290, Panel: C320X17-E60-H (G82)



https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgwmSPjy-JocTCbvAoLnopCf6auoYzgWTqEjpeSgQ8jBR971QlOqj4B-kjh3QfSnurx5UU0BJwFjGKhcd1J5rAd9S7QNG38fYLESII1qFHZZ5-AMbRZRBlOliB0i_aWM9oSE7D_W1PzQvI/s1600/TP.MS3463S.PB801_DCE.jpgThe appearance of the MainBoard TP.MS3463S.PB801 is shown in the figure below:
TP.MS3463S.PB801
TP.MS3463S.PB801 can be used in TVs:
AKAI LEA-40V35M (Panel LSC400HM06), AKIRA 32LED38T2P (Panel ST3151A05-8), AKIRA 32LED02T2M (Panel ST3151A04-9 Ver.2.1), BBK 32LEM-1029/TS2C (Panel C320X16-E18-H), BBK 39LEM-1033/TS2C (Panel C390X15-E8-A G01), BBK 32LEM-1026/TS2C (Panel CX315DLEDM ST3151A05-8), BBK 32LEM-1027/TS2C (Panel ST3151A05-8 / CX315DLEDM), DEXP F43C7100K (Panel LC430DUY (SH)(A1)), DEXP F42B7000M (Panel V420HJ2-P01), DEXP F43C7000C (Panel C430F14-E1-L / LC430DUY), DEXP F40B7100K (Panel LSC400HN02-G02 40N06-L-HPX1F1), DEXP H28C7100C (Panel C275X15-E1-H (G31)), DEXP H32C7300K (Panel LSC320AN02), DEXP H32D7100C (Panel ST3151A05-8 Ver2.5), DEXP H28D7300K (Panel HV280WX2-260), ERISSON 32LES78T2W (Panel KM0320LDRH0037), ERISSON 32LEE30T2 (Panel LK315T3HB87-12V), SUPRA STV-LC32T560WL (Panel LSC320AN10), SUPRA STV-LC32T550WL (Panel LSC320AN02), SUPRA STV-LC40T500WL (Panel C39X15-E7-A), TELEFUNKEN TF-LED32S45T2 (Panel LK315T3HB87-12V), THOMSON T39D20DH-01B (Panel T390XVN01.0).
Main features of SUPRA STV-LC32LT0020W device:
Installed matrix (LED panel) C320X16-E60-H.
Matrix control uses the Timing Controller (T-CON) MT3151A05-5-XC-9.
To power the backlight LEDs, a converter combined with the TP.MS3463S.PB801 main board is used, controlled by the SN51DP PWM controller.
The power module is combined with the MainBoard and is made according to the AC / DC flyback voltage converter using PWM SOT23-6 microcircuits.
MainBoard - the main board (motherboard) is a TP.MS3463S.PB801 module, using CPU chips: MSD3463GU, SPI Flash: GD25Q64, AUDIO: OB6220VP and others.
Tuner XF-3SDT-H (R840) provides reception of television programs and tuning to channels.
SUPRA LED TV STV-LC32LT0020W with LCD C320X16-E60-H, 32 "(81 cm) 16: 9 format diagonal. The required screen brightness of 260 cd / m² is provided by LED backlighting. Dynamic contrast ratio of 100,000: 1 is achieved special control of the LEDs depending on the illumination of areas in the scene. The display technology of the model uses LED LED backlight. It is possible to view programs and films and images in high quality HD at a resolution of 1366x768 pixels in the standard of graphic decomposition 720p (HD Ready). Supported file formats multimedia: MP3, MPEG4, MKV, JPEG.
Speaker power 16 W (2x8 W) is provided by two speakers. The NICAM STEREO audio processing system is used.
External interface (communication with other devices) is supported by standard input and output connectors: antenna input (RF), AV, audio x2, VGA, HDMI x3, USB. A headphone output is provided. The digital tuner is capable of receiving television channels in the DVB-T MPEG4, DVB-C, DVB-T2 standards.
Overall dimensions: 820x515x160 mm.
Attention! SUPRA STV-LC32LT0020W LED TV panel C320X16-E60-H is an expensive and unreliable element.
Do not allow any impacts on the glass and pressure on the screen surface to avoid damage to the LED panel!
It is also unsafe for liquid to spill onto the screen. Sometimes one drop is enough if it drips down the glass onto the cables to make the TV non-repairable.