TH-S11
TEST MODE
This player has a TEST MODE for product QC, service or repair.
Contents as follows. If the DVD TRAY is not completely closed, supply AC power and press POWER ON to close the TRAY.
After confirm that the TRAY is completely closed go to standby.
Once LED lights up, pull off the power plug. Reinsert the AC power plug to the outlet while pressing, “POWER" and "STOP" button at the front panel of the set.
TEST MODE has the 7 different steps. Press MENU key on the remote control to change the steps.
TEST MODE is canceled by the POWER key.
How to repair after carried out full-initialize
(1) Learning DVD
playback VT-501
(2) Learning CD
playback CTS-1000
(3) standby mode (push power key)
(4) Checking BCA
insert V-2805
test mode (press POWER and STOP button together during AC power plug in)
check mode (press menu key of remote controller)
BCA check (press +10 key of remote controller)
FL indication change "0000 0000" to "0000 0001" and Disc auto stop
(5) standby mode (push power key)
REGION CODES
Tray lock-Unlock
You can lock the tray and prohibit the unwanted disc ejection.
On the center unit ONLY:
While the system is on standby mode, press EJECT with STOP pressed and held.
The system turns on and “LOCKED” appears on the display window.
If you try to eject the disc, “LOCKED” appears to indicate that the tray is locked.
To cancel
Carry out the same operation again.
The system turns on and “UNLOCKED” appears on the display window.
Schematic diagram: Transformer section
Regulator section
Micon section
Audio section
Video section
Front section
DVD servo control section
DVD servo control section (2/2)
