US Model, Canadian
Model, AEP Model, UK Model, E Model, Australian Model,
Woofer: 130 mm (5 in) × 2, cone type
Tweeter: 50 mm (2 in) × 2, cone type
Always respect voltages. While some may not be dangerous in themselves, they can cause unexpected reactions that are best avoided. Before reaching into a powered TV set, it is best to test the high voltage insulation. It is easy to do, and is a good service precaution.
DESTINATION ABBREVIATIONS
AR : Argentina model
AUS : Australian and New Zealand models
CND : Canadian and Puerto Rican models
E4 : Middle East area (Bahrain, Lebanon, Libya, Oman, Pakistan, Qatar, Syria, Yemen) and African area (Algeria, Angola, Egypt, Ethiopia, Morocco, Tunisia) models
E93 : Middle East area (Iraq, Kuwait, Saudi Arabia, UAE) and
African area (Kenya, Nigeria, Tanzania) models
LA : Latin America area (Except for Argentina, Puerto Rico) model
KR : Korean model
RU : Russian model
SP6 : Southeastern Asian area (Except for India, Thailand) model
TW : Taiwan model
How to disassemble
When disassembling the unit, use the following jig for speaker removal.
J-2501-238-A JIG FOR SPEAKER REMOVAL
TOP COVER BLOCK removal
MAIN BOARD removal
Note : When replacing the MAIN board, be sure to replace the MAIN board and the NFC board simultaneously. The MAIN board cannot replace with single. Among the repair parts, the MAIN board and the NFC board are supplied as one unit.
POWER BOARD removal
NFC BOARD, CONTROL BOARD removal
Note: When replacing the NFC board, be sure to replace the MAIN board and the NFC board simultaneously. The NFC board cannot replace with single. Among the repair parts, the MAIN board and the NFC board are supplied as one unit.
RIGHT SIDE PANEL, LEFT SIDE PANEL removal
METAL CASE BLOCK removal
BOTTOM COVER + PLATE removal
FRONT PANEL BLOCK-1 removal
FRONT PANEL BLOCK-2 removal
SPEAKER LED (TOP) BOARD, FLASH LED BOARD removal
TUBE LED RIGHT BOARD, TUBE LED LEFT BOARD removal
SPEAKER UNIT (TW) (SP3, SP4) removal
SPEAKER UNIT (WF) (SP1, SP2) removal
