“Dolby”,
“Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
“DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater Systems, Inc.
US Model-STR-DE895-DE995
Canadian Model-STR-DE995
E Model-STR-DE895
Models of area code E2, E3, MX
Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %) 110 W + 110 W 2
Reference Power Output 2 [8 ohms 1 kHz, THD 10 %]
FRONT 1) : 130 W/ch
CENTER 1) : 130 W
SURR 1) : 130 W/ch
SURR BACK 1) : 130 W/ch 3) or 130 W 4)
Models of area code US, CND
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %) 100 W + 100 W
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT 1) : 100 W/ch
CENTER 1) : 100 W
SURR 1) : 100 W/ch
SURR BACK 1) : 100 W/ch 3) or 100 W 4) (8 ohms 1 kHz, THD 0.7 %)
FRONT 1) : 110 W/ch
CENTER 1) : 110 W
SURR 1) : 110 W/ch
SURR BACK 1) : 110 W/ch 3) or 110 W 4)
Tuning range
Models of area code US, CND
With 10-kHz tuning scale: 530 – 1710 kHz 7)
With 9-kHz tuning scale: 531 – 1710 kHz 7)
Models of area code E2, E3
With 10-kHz tuning scale: 530 – 1610 kHz 7)
With 9-kHz tuning scale: 531 – 1602 kHz 7)
Weight
10.6 kg (23 lb 6 oz) (STR-DE995)
9.7 kg (21 lb 7 oz) (STR-DE895)
TEST MODE
FACTORY PRESET MODE
* All pre-set contents are reset to the default setting.
* Procedure:
While depressing the [MOVIE] and the [MAIN MENU] buttons simultaneously, press the POWER button to turn on the main power.
The message “MEMORY CLEARING” and “MEMORY CLEARED!” appears for a moment and the present contents are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE (Except Mexican model)
* Either the 9 kHz step or 10 kHz step can be selected for the AM channel step.
* Procedure:
While depressing the [PRESET TUNING +] button or the [TUNING +] button, press the POWER button to turn on the main power.
Either the message “AM 9kHz Step” or “AM 10kHz Step” appears for a moment and select the desired step.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same time, then each segment lights on one after another.
* Procedure:
While depressing the [SB DECODING] (DE895), the [SURR BACK DECODING] (DE995) and the [DISPLAY] buttons simultaneously, press the POWER button to turn on the main power.
4. Press the [DIMMER] button, all segments and all LEDs light on.
5. Every pressing the [DIMMER] button turns on each segment and LED one after another in the same order.
SOUND FIELD CLEAR MODE
* The pre-set sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon completion of repair.
* Procedure:
While depressing the [2CH] button, press the POWER button to turn on the main power.
The message “S.F. Initialize” appears for a moment.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
While depressing the [A.F.D.] and the [DISPLAY] buttons simultaneously, press the POWER button to turn on the main power.
The model name, the destination and the software version are displayed for a moment.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander can be selected.
* Procedure:
While depressing the [ENTER] button, press the POWER button to turn on the main power.
Either the message “COM MODE [AV1]” or “COM MODE [AV2]” appears for a moment and select the desired mode.
SCHEMATIC DIAGRAM — MAIN SECTION (1/3)
SCHEMATIC DIAGRAM — MAIN SECTION (2/3)
SCHEMATIC DIAGRAM — MAIN SECTION (3/3)
MAIN BOARD PWB
DIGITAL BOARD
SCHEMATIC DIAGRAM — DIGITAL SECTION (1/3)
SCHEMATIC DIAGRAM — DIGITAL SECTION (2/3)
SCHEMATIC DIAGRAM — DIGITAL SECTION (3/3)
SCHEMATIC DIAGRAM — DISPLAY SECTION
