SOFTWARE UPDATE: USB DOWNLOAD
(1)
Plug in the USB to the TV
(2) If there are update-able files in the USB, the TV would ask that the user
want to process the SW upper version update.
2. NSU DOWNLOAD
(This Function is needed to connect to the
internet.)
Case 1) Auto Update On
(1)
Go to Menu → All Settings → Support → Software Update, then check Auto update
is turned on.
(2) After the update complete, the user can check a pop-up below the picture, which indicated update is complete and the new version will be applied after the TV turn off and on.
(4) If the user started the update, the TV shows a pop-up below the picture.
(5) [CHECK NOW] : Just
start the update.
[Close] : Close the pop-up.
For USB Download:
Follow the Step (1} and (2) first. Then continue
(3) Click “Yes” button : Start Update
4) Click “Check Now” :
Go to SW Update menu for monitoring
(5) TV has been starting SW update.
(6) After finishing the update, it will show a pop-up below the picture.
(7) Click “Yes” : TV will be turn off and on itself.
(4) If it needs to cancel the update, click “cancel update” button
(5) [“No”] : update
continue.
[“Yes”] : update cancel.
Case 2) NOT Allow Automatic Updates
Toggle Item
(1)
Go to Menu → All Settings → Support → Software Update
(2) If it found upper
version SW than the TV SW version, TV would show a pop-up like below the
picture.
“The latest version of the SW is available for your TV. Do you want to update
now”
(3) [Yes] : update
starts.
[No] : Close the pop-up, check out later.
