Technical description and composition of SAMSUNG UE43J5202 TV, type of panel and modules used. Module composition.
SAMSUNG LED
Model: UE43J5202 UE43J5202AU
Chassis/Version: BZ01
Panel: BOEI430WU1
LED backlight: GC43D08-ZC22AG-15 303GC430043
T-CON: HV430FHB-N1A 47-6021139 HV430FHBN1A
LED driver (backlight): integrated into PSU
PWM LED driver: SLC7015R
MOSFET LED driver: TO-252
Power Supply (PSU): BN44-00852A L48MSF_FDY
PWM Power: FA6A20N
MOSFET Power: TO-220, TO252
MainBoard: BN41-02482A BN94-12496G
MainBoard IC: CPU, eMMC, SPI Flash, DRAM, AUDIO, DC/DC
MainBoard: BN40-00318A DNTS243H5A
Control: Wi-Fi: WDF710Q BN59-01196C, IR: J5000_5200 BN41-02477A A38694D
Specifications UE43J5202AU
SAMSUNG UE43J5202
General recommendations for LCD LED TV repair
Possible defects
- SAMSUNG UE43J5202 does not turn on and does not show any signs of performance at all. Does not blink on the indicators and does not respond to the control buttons.
Often in such cases the power module BN44-00852A is defective. Then we recommend to measure its output voltages and in case of their absence you should check the functionality of the power switches (TO-220, TO252) and the inverter rectifier diodes for probable short circuit.
If the semiconductors in the secondary circuits breakdown, the inverter can usually be short-circuited, and the mains fuse is often blown when the power elements in the primary circuit are shorted.
Breakdown of power switches (MosFet) in pulsed sources, sometimes caused by faults in other circuit elements, such as PWM controller supply, frequency-retaining or damping circuits, as well as in negative feedback stabilization circuits (NFSR). PWM regulators FA6A20N, if they do not have visible housing damage and outright short circuits between pins, are usually checked by replacement.
- No picture, but sound is present, remote control responds. Or the image appears at power on and immediately disappears.
Failure in most of these cases is detected in the nodes and elements of LED panel backlight. The cause may be in the breakage of the backlight LEDs, in their power supply stabilization, or in the violation of the contact connections of the GC43D08-ZC22AG-15 303GC430043 string connectors.
When trying to detect breaks in the LED strings, you should keep in mind that it is difficult to do without disassembling the panel. For example a current source is needed to open the PN junctions connected in series.
- The TV doesn't turn on, the remote control doesn't respond. Indicator blinks or signals standby mode.
Repair or diagnostic of the motherboard BN41-02482A should begin with checking the stabilizers and power converters necessary to power the chips and matrix. If necessary, software (software) should be updated or replaced. If there is no possibility to replace the MB board (SSB), it is necessary to check the functionality of its components - CPU, eMMC, SPI Flash, DRAM, AUDIO, DC/DC. Defective components should be replaced.
The BN40-00318A DNTS243H5A tuner is faulty after checking the software and all the supply voltages at the terminals. The data exchange between the tuner and the processor via I2C can be checked with an oscilloscope.
Users and owners of TVs need to remember that trying to repair the SAMSUNG UE43J5202 TV without the appropriate qualification and the necessary experience, can lead to serious negative consequences!
More on MainBoard repair
The exterior of the MainBoard BN41-02482A is shown in the figure below:
N41-02482A
MainBoard Appearance
The main features of the SAMSUNG UE43J5202:
A matrix (LED panel) BOEI430WU1 is installed.
Timing Controller (T-CON) HV430FHB-N1A is used to control the matrix.
A converter combined with a power supply is used to power the backlight LEDs and is controlled by the SLC7015R PWM controller. As the power elements of LED-driver are used switches of TO-252 type.
The power supply module BN44-00852A or its analogues with the use of FA6A20N chips and TO-220, TO-252 power switches form the necessary supply voltages for all the nodes of SAMSUNG UE43J5202 TV.
Instructions and updates
There are downloadable files for un43j5200ahxpa model from the manufacturer:
User Manuals and Instructions (User Manuals):
File Type File Name Version Date Size
ENG-NMDVBEU-1.110 user manual 1.110 11.11.2015 4.57 Mb
You can download the files from the manufacturer's website for the model un43j5200ahxpa.
MainBoard - the main board (motherboard) is a module BN41-02482A, using CPU, eMMC, SPI Flash, DRAM, AUDIO, DC/DC and other chips.
The BN40-00318A DNTS243H5A tuner provides TV program reception and channel tuning.
SAMSUNG UE43J5202AU TV with BOEI430WU1 LCD display, measuring 42.5" (108 cm) diagonally in 16:9 aspect ratio. The 1000000:1 dynamic contrast ratio is achieved by special control of the LEDs depending on the brightness of the scene. This model uses a panel with an end arrangement of LEDs in the display backlight - Edge LED.
Matrix BOEI430WU1 and MainBoard software BN41-02482A provide for viewing shows and movies in high quality HD at a resolution of 1920x1080 pixels in 1080p (Full HD).
The model of TV UE43J5202AU has built-in software (software) SMART and installed the operating system Tizen. Connection to the network can be made via Wi-Fi wireless connection. Supported media file formats: MP3, WMA, MPEG4, DivX, MKV, JPEG.
The speaker system has a sound power of 20 W (2x10 W) provided by the two speakers. It uses NICAM stereo sound processing and Sound Surround surround function.
Communication with other devices via an external interface is supported by standard input and output connectors: antenna input (RF), AV, component, HDMI x2, USB, Ethernet (RJ-45), Wi-Fi 802.11n, WiDi, Miracast. The digital tuner is capable of receiving DVB-T, DVB-T2, DVB-C TV channels.
The power consumed by the worker in mains mode is 84 W. The power supply BN44-00852A.
Overall dimensions: with stand 986x632x288 mm, without stand 986x575x72 mm.
TV weight: with stand: 8.5 kg, without stand: 7.5 kg.
Warning. The BOEI430WU1 panel of the SAMSUNG UE43J5202AU LED TV is an expensive and unreliable part of it.
Do not allow any impact on the glass and pressure on the surface of the screen to avoid damage to the LED-panel!
It is also not safe to get liquid on the screen. Sometimes one drop is enough if it drips down the glass onto the cables and the TV becomes unrepairable.