Technical description and composition of the SONY KD-55XF9005 TV, panel type and modules used. The composition of the modules.
SONY LED
Model: KD-55XF9005
Chassis / Version: MAIN BM2A
Panel: YD8S007DND01B // LSY550FF04-A01
LED backlight: CCB 55 MBL-55030D915SN1, MBL-55030D915SN0
T-CON: 18Y_SHU11A2H2A4V0.0 LMY550FF04-B
LED driver (backlight): 1-983-107-31 173702831
Power Supply (PSU): APS-419 1-983-329-11
PWM Power: PFC, PWM
MOSFET Power: N-FET TO-220F
MainBoard: 1-983-249-31 YA03031AB
IC MainBoard: CPU, Scaler, eMMC, AUDIO, DC / DC
Tuner: CE553ZP
Control: WiFi: 1-458-998-11 J20H088
Specifications KD-55XF9005
SONY KD-55XF9005
General recommendations for TV LCD LED repair
Possible malfunctions
- TV SONY KD-55XF9005 does not turn on and does not give any signs of turning on, does not respond to control buttons and to the remote control.
In some of these cases, the main switching power supply, the APS-419 module, is faulty. Its output voltages should be measured and, in their absence, the serviceability of the power switches (N-FET TO-220F) and rectifier diodes in the converters should be checked for possible breakdown.
In case of any breakdowns in the secondary circuits, the converter can operate in an emergency mode of a short circuit, and with a short circuit in the power elements of the primary circuit, the mains fuse or the current sensor at the source of the key is often cut off.
Mos-Fet keys used in switching power supplies usually fail due to a malfunction of other elements that can disable it in key mode, or provoke an excess of the maximum current or voltage values. These can be circuits supplying a PWM controller, damper or frequency setting circuits, or OOS (negative feedback) elements in the stabilization circuit. PWM controllers (PWM) PFC, PWM, in the absence of external damage and short circuit between the terminals, are checked by replacing them with a known good one.
- There is no image, the screen is black, there is sound, sometimes you can see barely noticeable outlines of the image in the ambient light of the screen.
In such cases, the most likely malfunction of the LED panel backlighting elements. Often the reason is a malfunction of the LEDs (open circuit, short circuit ...), or the connectors of the strips (strings) CCB 55 MBL-55030D915SN1, MBL-55030D915SN0, less often the LED driver turns out to be faulty.
To check the LED strips for breakage without disassembling the panel, for example, a current source will help. It is impossible to open series-connected PN junctions with a simple multimeter; a voltage of the order of several tens of volts is required.
- The indicator blinks or is on constantly, the TV does not turn on, does not respond to the remote control.
Repair or diagnostics of the motherboard 1-983-249-31 should begin with checking the stabilizers and power converters required to power the microcircuits and matrix. If necessary, you should update or replace the software (software). When repairing an MB board, it is necessary to check its components CPU, Scaler, eMMC, AUDIO, DC / DC. Defective elements must be replaced. If chips with BGA soldering technology are used, the problem in its implementation is detected by local heating of the chip.
In cases where there is no tuning for terrestrial or cable TV channels, you should make sure that the software is correct, as well as that the supply voltages on the CE553ZP tuner outputs match. It is also necessary to check with an oscilloscope the presence of pulses of data exchange between the tuner and the processor via the I2C bus.
Users and owners of TVs should remember that attempts to self-repair a SONY KD-55XF9005 TV without the appropriate qualifications and necessary experience can lead to serious negative consequences!
Additional MainBoard Repair
The appearance of MainBoard 1-983-249-31 is shown in the figure below:
1-983-249-31
External view of the power supply
APS-419:
APS-419
The main features of the SONY KD-55XF9005 device:
Installed matrix (LED panel) YD8S007DND01B or LSY550FF04-A01.
Matrix control uses Timing Controller (T-CON) 18Y_SHU11A2H2A4V0.0.
The LED driver 1-983-107-31 is used to power the backlight LEDs.
The formation of the necessary supply voltages for all nodes of the SONY KD-55XF9005 TV is carried out by the APS-419 power module, or its analogues using PFC, PWM microcircuits and power switches of the N-FET TO-220F type.
MainBoard - the main board (motherboard) is a 1-983-249-31 module using CPU, Scaler, eMMC, AUDIO, DC / DC and others.
Tuner CE553ZP provides reception of television programs and tuning to channels.
Instructions and updates
Firmware update to version 6.6555:
File sony_dtvota_2016_1606555100_eua_auth.zip, version 6.6555 dated 04/22/2020 (1 886 350 011 bytes).
For models: KD43XG8305, KD49XG8305, KD49XG8377, KD43XG8388, KD49XG8388, KD43XG8396, KD49XG8396, KD43XG8399, KD49XG8399, KD49XG9005, KD55AG8, KD65AG8, KD43XG8096, KD49XG8096, KD55XG8096, KD65XG8096, KD75XG8096, KD43XG8196, KD49XG8196, KD55XG8196, KD65XG8196, KD65AF8, KD55AF8, KD75XF9005, KD65XF9005, KD55XF9005, KD49XF9005, KD65XF8796, KD55XF8796, KD49XF8796, KD43XF8796, KD65XF8599, KD55XF8599, KD49XF8599, KD43XF8599, KD85XF8596, KD75XF8596, KD65XF8596, KD55XF8596, KD49XF8596, KD43XF8596, KD65XF8588, KD55XF8588, KD49XF8588, KD43XF8588, KD65XF8577, KD55XF8577, KD49XF8577, KD43XF8577, KD65XF8505, KD55XF8505, KD49XF8505, KD43XF8505, KD70XF8305, KD60XF8305, KD55XF8096, KD49XF8096, KD43XF8096, KD65XF7596, KD55XF7596, KD49XF7596, KD43XF7596, KDL49WF805, KDL43WF805, KDL49WF804, KDL43WF804, KD77A1, KD65A1, KD55A1, KD75XE9405, KD65XE9305, KD55XE9305, KD75XE9005, KD65XE9005, KD55XE9005, KD49XE9005, KD75XE8596, KD65XE8599, KD65XE8596, KD65XE8588, KD65XE8577, KD65XE8505, KD55XE8599, KD55XE8596, KD55XE8588, KD55XE8577, KD55XE8505, KD55XE8396, KD55XE8096, KD49XE8396, KD49XE8099, KD49XE8096, KD49XE8088, KD49XE8077, KD49XE8005, KD49XE8004, KD43XE8396, KD43XE8099, KD43XE8096, KD43XE8077, KD43XE8005, KD43XE8004, KD100ZD9, KD75ZD9, KD65ZD9, KD49XD8305, KD43XD8305, KD55XD8005, KD49XD8005, KD43XD8005, KD49XD8077, KD43XD8077, KD49XD8088, KD43XD8088, KD49XD8099, KD43XD8099, KD65XD7504, KD65XD7505, KD55XD7004, KD49XD7004, KD55XD7005, KD49XD7005, KD50SD8005.
The update file and instructions can be downloaded from the manufacturer's website for the KD-55XF9005 model.
Benefits and improvements of the latest update:
Improved TV turn-on time when exiting standby mode.
Guides and instructions are also offered for this model:
Reference Manual (Web Manual). Published on 13 Feb 2019.
Quick Setup Guide and Quick Start Guide. Published on 14 Aug 2019, size 817 KB.
Wall-Mount Bracket. Published on 13 Apr 2018, size 37.63 MB.
Directory. Published on 26 Mar 2018, size 4.07 MB.
SONY KD-55XF9005 TV with LCD LSY550FF04-A01, diagonal size 54.6 "(139 cm) 16: 9 format. The required screen brightness of 600 cd / m² is provided by LED backlighting. The ratio of maximum brightness to minimum (contrast) is 6000 : 1. The LCD panel uses Direct LED backlighting.
LSY550FF04-A01 sensor and MainBoard 1-983-249-31 software are capable of realizing images in the highest UHD quality at a resolution of 3840x2160 pixels in 4K UHD, HDR. Image processing is performed using modern High Dynamic Range (HDR) technology with an extended range of brightness gradations.
KD-55XF9005 TV has built-in SMART software and pre-installed Android Operating System. Internet connection can be made via Wi-Fi wireless connection. Video processor supported media file formats: MP3, WMA, MPEG4, HEVC (H.265), Xvid, DivX, MKV, JPEG.
The power of the sound speaker system is 20 W (2x10 W), provided by two speakers. Uses the NICAM stereo signal processing system and the Sound Surround function.
The external interface (communication with other devices) is supported by standard input and output connectors: antenna input (RF), AV, HDMI x4, USB x3, Ethernet (RJ-45), Bluetooth, Wi-Fi 802.11ac, Miracast. A headphone output is provided. The digital tuner is capable of receiving television channels in the DVB-T, DVB-T2, DVB-C, DVB-S, DVB-S2 standards.
The power consumed when operating from the mains is 245 W. APS-419 power supply.
Dimensions: with stand 1228x771x268 mm, without stand 1228x706x69 mm.
TV weight: with stand: 19.1 kg, without stand: 18.2 kg.
Attention! The panel LSY550FF04-A01 of the SONY KD-55XF9005 LED TV is the most expensive element.
Avoid impacts on the glass and excessive pressure on the screen surface to avoid damage to the LED panel!
It is unsafe for any liquid to spill on the screen. Sometimes one drop of water is enough, if it flows down the glass onto the plumes, the TV may become unrepairable.