SHARP PZ-43MR2E - PZ-50MR2E LCD TV- HOW TO SETUP XBOX-360 - MICROSOFT XBOX CONFIGURATION

SHARP PZ-43MR2E - PZ-50MR2E LCD TV- HOW TO SETUP XBOX-360 - MICROSOFT XBOX CONFIGURATION

SETUP PROCEDURE

• Before you connect your XBOX-360, ensure that you have told your LCD-TV that you are going to use component signal input.  Using the sharp LC-42XD1E as an example:
• Press ‘Menu’ button on the remote control.
• Using the cursor arrows on your remote control, move to ‘Connections’ and press the “OK” button.
• Using the cursor arrows, move to ‘Input select’ and press the “OK” button.
• Using cursor arrows, move to ‘EXT4’.
• Using cursor arrows, more to ‘Component’ and press the “OK” button.
• Press the “End” button on the remote control.

Connecting XBOX360.

• Before you can configure the XBOX360, you need to ensure the cable to your Sharps LCD-TV have been configured correctly.
• Using the HD AV cable supplied with the XBOX360 PRIMIUM, using the 3 RCA to 15-pin D-sub adapter cable supplied with the Sharp LCD-TV, using the Sharp LC-42XD1E as an example.
• Connect the HD AV cable to the XBOX360 and ensure the setting switch has been moved to “HDTV”

• Connect the HD AV cable to the 3 RCA to 15-pin S-sub adapter cable using the corresponding colors.

• Connect 3 RCA to 15-pin D-sub adapter cable to your LCD-TV.

CONFIGURING XBOX360

• When you power ON the XBOX360, your unit will output 720P and display the following screen.

• Using the cursor keys on the controller, move to “System”.

• Press the “Select” button on the controller.

• Using cursor keys on the controller, move to “Display”, and press the “Select” button.

• Using cursor keys, move to “HDTV” setting, and press “Select”.

• Using cursor keys, move to the output of your choice, and press “Select” button.

NOTE: Sharp LCD-TV’S only support 480p, 720p and 1080i output via component.  1080p is supported via the 2 x HDMI inputs {HDMI cable not available from Microsoft}

NOTE:  This screen is only available after downloading the XBOX360 update from XBLX live.  If the XBOX360  update has not been applied, you can only select 720p and 1080i.

• After selecting your output, the screen will blank for a few seconds and then display the following.

• Follow the on-screen instructions using the cursor keys on the controller and pressing the “Selsct” button.  The screen will blank again for a few seconds switching to 50Hz.  The following will be displayed.

• Follow the on-screen instructions using the cursor keys on the controller and pressing “Select” button.
• You've now configured your XBOX360 for use with your Sharp LCD-TV.