Beko B13, B7S, B7SLED washing machine how to disassemble the machine
Hinge
After the exterior door is removed the hinge can be removed
together with the bushing. [See the previous post to know how to remove the
exterior door]
Handle cover
The tabs (2 pieces) connecting the handle cover to the decorative
cover is removed with a screwdriver.
Pry the handle cover from its corners and separate it from the
decorative part.
The handle pin is removed as shown below removing the pin using pliers.
Lock Hook- Spring
It will be removed easily after the handle pin is removed.
Decorative cover
It will be removed after removing the bolts connecting decorative
cover and interior door and dismantling the tabs.
Glass
After the all parts are removed, the glass and the interior door
can be separated easily.
Pry the handle cover from its corners and separate it from the decorative part.
Pry the handle cover from its corners and separate it from the decorative part.
Pumps cover assembly/disassembly
Pump cover which is located on the right bottom side of the front
wall is opened by being pushed from the tab.
Front Wall Disassembly/Assembly
Front door group is removed.
Body bellows clamp fixing the drum bellows to the front door is removed by use of a special bellows clamp pliers.
Door locking screws are removed.
Lock is pushed from its place inwards.
At the upper position of the panel connection, 2 screws ensuring the connection of the ears are removed.
Body bellows clamp fixing the drum bellows to the front door is removed by use of a special bellows clamp pliers.
Door locking screws are removed.
Lock is pushed from its place inwards.
At the upper position of the panel connection, 2 screws ensuring the connection of the ears are removed.
Dispenser panel
Dispenser is pulled backwards from the detergent compartment.
Disassembly/Assembly of Detergent Dispenser
Dispenser is removed by pressing on the area shown with arrow on
the siphon.
Panel
Dispenser is
removed.
3 pt screws which fix the panel to the panel reinforcement bracket
and the detergent compartment and shown separately in the following pictures
are
removed. Tabs fixing the panel to the reinforcement bracket are released and the panel is detached from the reinforcement bracket.
removed. Tabs fixing the panel to the reinforcement bracket are released and the panel is detached from the reinforcement bracket.
Pt screws on the areas shown with arrow sign are removed and card
group is detached from panel.
