How to enter service mode Panasonic LCD TV - PANASONIC TC-L42U12 – Service mode – Led blinking code – Voltage adjustments – hotel mode - LCD Television repair and service
Category: LCD Television Repair and Service
Contents of this article
- How to activate service mode
- Power LED blinking and causes
- Self check mode
PANASONIC TC-L42U12
Service Mode
How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
SRV-TOOL
How to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
How to access
1. Select [SRV-TOOL] in Service Mode.
2. Press [OK] button on the remote control.
Display of SOS History
SOS History (Number of LED blinking ) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory shipment setting].
POWER ON TIME/COUNT
Note : To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
Exit
1. Disconnect the AC cord from wall outlet.
SOS History (Number of LED blinking ) indication.
From left side; Last SOS, before Last, three occurrence before, 2nd occurrence after shipment, 1st occurrence after shipment.
This indication except 2nd and 1st occurrence after shipment will be cleared by [Self-check indication and forced to factory shipment setting].
POWER ON TIME/COUNT
Note : To display TIME/COUNT menu, highlight position, then press MUTE for 3sec.
Time : Cumulative power on time, indicated hour : minute by decimal
Count : Number of ON times by decimal
Note : This indication will not be cleared by either of the self-checks or any other command.
Exit
1. Disconnect the AC cord from wall outlet.
Hotel mode
Access command to the Hotel mode setup menu In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol. [Down] + [REMOTE] : INPUT (3 times)
Access command to the Hotel mode setup menu In order to display the Hotel mode setup menu, please enter the following command (within 2 second). [TV] : Vol. [Down] + [REMOTE] : INPUT (3 times)
To exit the Hotel mode setup menu
Disconnect AC power cord from wall outlet.
Disconnect AC power cord from wall outlet.
How to access
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
Self-check indication only:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control
for more than 3 seconds.
Self-check indication and forced to factory shipment setting:
Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote
control for more than 3 seconds.
Exit
Disconnect the AC cord from wall outlet.
Disconnect the AC cord from wall outlet.
Power LED Blinking
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit.
Measurements and Adjustments
Voltage chart of P-board
Voltage chart of P-board
VOLTAGE
|
TEST POINT
|
SPECIFICATION (Reception state)
|
5.136
|
TP2831
|
5.2
± 0.26 V
|
3.305
|
TP5480
|
3.3
± 0.16 V
|
1.261
|
TP5602
|
1.26
± 0.06 V
|
1.835
|
TP5601
|
1.83
± 0.09 V
|
3.309
|
TP5600
|
3.3
± 0.16 V
|
4.775
|
TP5405
|
5 ±
0.25 V
|
9.097
|
TP5481
|
9 ±
0.45 V
|
30.94
|
TP8300
|
30 ±
1.5 V
|
17.33
|
TP5431
|
17 ±
0.85 V
|
17.33
|
TP5417
|
17 ±
0.85 V
|
11.97
|
TP5432
|
12 ±
0.6 V
|
11.95
|
TP5413
|
12 ±
0.6 V
|
5.709
|
TP5433
|
5.6
± 0.28 V
|
5.706
|
TP5439
|
5.6
± 0.28 V
|
Voltage chart of A-board
VOLTAGE
|
TEST POINT
|
SPECIFICATION (Reception state)
|
STB5V
|
TP2831
|
5.2
± 0.26 V
|
STB3.3V
|
TP5480
|
3.3
± 0.16 V
|
SUB1.2V
|
TP5602
|
1.26
± 0.06 V
|
SUB1.8V
|
TP5601
|
1.83
± 0.09 V
|
SUB3.3V
|
TP5600
|
3.3
± 0.16 V
|
SUB5V
|
TP5405
|
5 ±
0.25 V
|
SUB9V
|
TP5481
|
9 ±
0.45 V
|
BT30V
|
TP8300
|
30 ±
1.5 V
|
P17V
|
TP5431
|
17 ±
0.85 V
|
SOUNDVCC
|
TP5417
|
17 ±
0.85 V
|
DTV12V
|
TP5432
|
12 ±
0.6 V
|
PANEL12V
|
TP5413
|
12 ±
0.6 V
|
5VS
|
TP5433
|
5.6
± 0.28 V
|
TUNER6V
|
TP5439
|
5.6
± 0.28 V
|
