REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday 10 April 2019

APPLE IPHONE 4 CDMA – DISASSEMBLING PROCEDURE – HOW TO REMOVE THE CASE – HOW TO REPLACE THE EARPIECE POWER BUTTON AND OTHER COMPONENTS

Apple iPhone 4 CDMA – Disassembling procedure – How to remove the case – How to replace the Earpiece power button and other components



Apple iPhone 4 CDMA
DISASSEMBLING PROCEDURE 
Remove the two pentalobe screws on either side of the dock port connector with the iPhone 5-Point Pentalobe screwdriver.
Grip the back cover of the phone and push upward about 1/8 of an inch to remove the back cover from the iPhone 4.
You can now remove the back cover from the iPhone 4.
There is a cover over the battery connector. To disconnect the cover, locate and remove the one Phillips screw (#00) that secures it in place.
When the screw is removed, use the spudger to gently pry up the connection releasing it from the motherboard.
To remove the battery, use the plastic opening tool and the pull-tab to pry the battery out of its location. It is secured by a small amount of adhesive.
Remove the battery from the iPhone 4.
Use the spudger to gently pry the connection for the dock port out of its socket.
To begin removing the motherboard from the phone, locate and remove the two Phillips screws (#00) that secure the dock port connector cover. Peel back the dock port connector ribbon wire.
You will see a single Phillips screw (#00) that has a contact for the antenna plug attached to it. Use the screwdriver to remove the screw and contact.
When the contact is removed, use the spudger to pry the antenna out of its plug.
A metal cover for the iPhones cables and the grounding clip are held in with six Phillips screws (#00). Locate and remove the screws with the appropriate screwdriver.
When the screws are out, remove the cover from the Phone 4.
With the spudger, gently pry up on the rear-facing camera connection to unplug it from its socket.
Remove the rear-facing camera from the iPhone 4.
There are two connections that need to be disconnected. With the spudger, gently pry the connections from their sockets in the LCD and the touch screen.
The grounding clip, that was previously unscrewed, covers the connection for the Wi-Fi antenna.
Remove the cover and unplug the antenna using the spudger.
Using the spudger again, pry the front-facing camera, headphone jack and volume, and power button cables out of their sockets.
Three standoffs and two Phillips screws (#00) hold the motherboard into the iPhone 4 case. Use the small flathead screwdriver to remove the standoffs and the small Phillips screwdriver for the two screws.
With all the connections withdrawn and the securing screws removed, remove the motherboard from the iPhone 4.
To remove the speaker assembly, locate and remove the two Phillips screws (#00) that secure the speaker in the bottom of the iPhone 4 case.
With the speaker mounting screws out, peel the speaker assembly out of the iPhone 4 with the spudger. Now, remove it from the case.
To remove the dock port assembly, locate and remove the two Phillips screws (#00) with the appropriate screwdriver.
Disconnect the one ribbon wire from its socket.
Do not forget to unlock the socket before trying to extract the cable from its location. Flip the opposite side of the connection up 90 degrees to release the cable.
With all connections withdrawn and the screws removed, use the spudger to pry the dock port assembly from the iPhone 4 case.
A metal clip secures the front-facing camera. Use the spudger to pry one side of this clip to release the camera. It is now free from the assembly.
You can now remove the front facing camera from the iPhone 4.
The headphone jack has an antenna adhered to it.
Use the flat end of the spudger to pry this antenna away from the headphone jack.
There is a single Phillips screw (#00) left that secures the headphone jack. Use the small Phillips screwdriver to remove this screw.
Maneuver the headphone jack out of its housing and prepare to remove it in the follow steps.
To remove the antenna, locate and remove the one
Phillips screw (#00) in the side of the iPhone 4 case.
Locate and remove the four small Phillips screws (#00) that secure the volume buttons into the side of the iPhone 4 case.
With the headphone jack loose and the screws holding the volume buttons removed, the entire assembly can be removed from the iPhone 4.
The vibrator unit is adhered to the center of the iPhone 4 case. Use the spudger to pry the unit out and then remove it from the iPhone 4.
 There are ten Phillips screws (#00) that secure the display assembly to the iPhone 4 case. Locate and remove those screws. Now, remove the LCD and touch screen.
With the screws removed, use the plastic opening tool to pry the display assembly away from the metal case of the iPhone 4. Now, separate the display assembly and metal case from each other.
 The home button sits under the display assembly. When the display assembly is removed from the iPhone 4 case, pick the button out of its location for replacement.
The power button assembly is secured with two Phillips screws (#00). Use the appropriate screwdriver and remove the screws. Remove the power button assembly from the iPhone 4.
 The earpiece speaker is adhered to its location in the iPhone 4 case. Use the spudger to gently pry the speaker from its location.
Remove the earpiece speaker from the iPhone 4.
Posted By: FRANK at 00:56
TAG: , ,