BANG & OLUFSEN BeoVision 7-32MK II - 3-D - SERVICE MODE & ADJUSTMENTS
ADJUSTMENTS
At
the Customer Service menu functions can BeoVision 7 individually adjusted and
optimized, for which purpose the support of the normally Retail partner or
service center is required.
The
service center can also find basic device information directly on the screen
instead of on a label on the back read.
Customer
Service Call up the menu:
- Press
MENU on Beo4 to enter the "TV Set-up Menu."
- The cursor to "OPTION" set. The RED
button and within three second press GO.
Status
information
Shows
the version and main group for type approval.
This
number shows whether the TV set with DVD DVB-S, Digital Surround Sound, etc. is
provided.
Unique
number of the TV.
Displays
the current option setting.
Software
version of the application processor (AP).
Software
version of the IOP processor.
Software
version of the M2 processor.
Software
version of the status display processor.
Software
version of the set-top box controller table.
For
future use.
Software
version of the digital surround sound module (processor).
Move
cursor: [Up / Dn]
Select
new values: [<< >>]
New store values: GO.
SOUND
- AVC
ON / OFF (default ON)
The
automatic volume control AVC provides all TV channels for a constant volume.
The AVC compensates for the different TV channels possibly different tone
modulation.
- AVC
AVC is turned ON
- AVC
AVC OFF is disabled
- WSS
DETECT STATUS ON / OFF DETECT / BROADCAST ONLY (default DETECT ON)
- Wide
Screen Signalling (WSS) is the signal for the correct aspect ratio
setting. The signal is usually
available on DVD and can of TV channels be aired.
BROADCAST
ONLY
Only
TV tuner signal.
Signal
detection for signals from the TV tuner enabled.
The
signal is sent by the broadcaster.
All
sources, e.g. TV tuner, DVD and connected to the AV sockets sources.
Signal
detection is disabled.
Can
be used with poor signal quality when the image format arbitrarily replaced.
This
can occur when TV tuner signals with poor signal to noise ratio.
AutoFormat
ENABLED / DISABLED (default ENABLED)
Auto
Format sets the best ratio and uses this Black Bar Detection.
The
image can always be selected manually using the Beo4. ENABLED
It
is automatically selected the best picture format.
The
selected picture format is retained.
The
image format is either the default setting or with the Beo4.
- 4:3
FORMAT ON / OFF (default OFF)
The
4:3 aspect ratio is not activated in the factory setting.
It
can be activated manually with Beo4.
4:3
is only enabled in FORMAT first ON
4:3
FORMAT is enabled in the first OFF
4:3
FORMAT is disabled in the first
Adjusting
the timing of the switch from TV mode to home cinema Mode and vice versa.
Home
Cinema is with, ASPECT 0 activated 'or disabled.
Enabled:
If an HDTV source is selected on the TV set automatically between CVBS and Y /
Pb / Pr input.
Disabled:
If an HDTV source is selected, switches the TV to always
Y
/ Pb / Pr input.
Used
when a connected AV source requires a long blanking time.
Cinema
Control outputs 1 and 2 can for controlling a motor
Projector
screen, via motorized curtains and lighting
Expander
boxes are used. For example, a motor
Cinema
projection screen on the Control 1 and Control 2 lights at Cinema be connected.
Both
outputs are connected with open collector and can connected devices do not
provide power, so it is an external Power required.
The
setting determines the delay time for connected devices. when
,
Home Cinema 'is activated, the output after the delay time on 'Closed' set
(low). Here, the supply voltage of the external power supply from the open
collector 'to ground switched. If, for As a relay is a motor connected to the
projector screen, it turns, and the Projector screen moves down. If an Expander
for other devices is connected, the input is on, switched low '.
This
setting determines the delay of the activation of, Home Cinema 'to to warm up
the projector firmly, when the image appears.
This
setting determines the delay of the activation of, Home Cinema 'to to reach the
standby position of the stand firmly.
Control
Cinema 1 and 2 set the delay time for connected equipment fixed. If, Home
Cinema 'is activated, the output is taken after the Delay time to 'open' set
(high). Here, the Supply voltage of the external power supply from the open
collector 'from Mass separated.
If,
for example, a relay of a motor is connected to the projector screen, it
switches, and the projector screen moves up. If an Expander for other Equipment
is connected, the input is on, shift up '.
The
setting (100 s) defines the delay between the deactivation of , Home Cinema 'to
the projector to cool down firmly until it is switched on again can be.
The
setting (17 s) defines the delay between the deactivation, Home Cinema 'to
reach the viewing position of the pivot foot firmly when the TV is turned on.
The
blanking time can be extended if, for example, a connected set-top
Box
slow sync on a satellite channel.
Depending
on the setting of the selected input connector, the display of the TV image
delayed (blanked).
The
lines PICTURE ADJUSTMENTS ADJUSTMENTS and GEOMETRY are
Described
in section settings.
Software
version numbers
The
line "STB TABLE 1.0" shows the version of the conversion of set-top
box Beo4 remote control codes in code. The line will only appear if the M2
processor was flash programmed.
"VARIANT"
displays on the TV to which the AP is set SW. Factory setting.
Type,
product and serial numbers
PIN
code status. Indicates if the master code is entered correctly (STORED /NOT
STORED)
Option
programming
Last
five TV error
Last
ML error
Last
AVL error of the AV jacks.
Option
0 = The IR receiver on the TV is not connected.
Option
1 = The TV and the audio system (BeoLink system) are located in the same room.
Option
2 = The TV and the audio system (BeoLink system) are in different rooms.
Option
4 = not connected to Link Two televisions in the same room.
Option
5 = The TV and the audio system (BeoLink system) are located in same link room.
Option
6 = The TV set is the only one in the link room.
The
TV can recognize certain types of errors and on the screen View.
The
five units are as error and error codes with the System time supplied stating
month / day (four digits) of their occurrence displayed. The most recent error
is displayed above. Since the TV does not Hardware clock has the
Monats-/Datumsangabe not exact, but it can be used to check whether the same
date further error occurred is.
The
following TV types of errors can be displayed:
No
errors registered
DF
data error
POR1
power-reset error 1
POR2
power-reset error 2
PDD
error when switching off
YZ-XX
(XX = IIC address
Y
= IIC bus 1 or bus 2
Z
= any IIC bus segment A / B / C / D)
ML
error codes are used to detect errors in the Master Link system.
No
errors registered
CI
address configuration impossible
TD
ML data pulled to ground
TU
ML data to "High" pulled
?
Other unidentifiable error possibilities.
AVL
error codes from the AV jacks
No
errors registered
TI
transfer impossible
Blocked
TD data connection.
Motorized
stand
- Motorized
stand-error codes
ST-01
calibration error too few positions
ST-02
calibration error too many positions
ST-03
calibration error EEPROM
ST-04
calibration error Transducers
ST-05
calibration error position
After
the elimination of a fault, which causes the display of an error code has, then
the error code will be deleted. Purpose GO MONITOR Information menu press.
The
Zone
Provides
access to the DVD service, which inter alia be checked whether the DVD region
code matches under the "region" displayed.
Open
Zone:
Press
the GO button, the TV picture appears
DVD
press and wait for the DVD image
Press
MENU and then press 0 0 GO
The
DVD-Service menu
Press
the GO button, the DVD service menu appears
To
exit the DVD service menus on the TV to standby switch.
