BRIGHTSTAR UNIVERSAL REMOTE CONTROL - SET-UP PROCEDURE AND SET-UP CODES PROCEDURE (3 DIGIT)

How To Program Brightstar Universal Remote To TV

Step 1. Ensure that you turn on the TV you want to program.
Step 2. Hold your Brightstar remote to face your TV
Step 3. Find and Press the SETUP button on your remote until the tiny LED light turns on.
Step 4. Find the correct code for your device from the list above and key in using the number keys on your remote.
Step 5. If you enter an incorrect code, the tiny LED light will blink a couple of times. Pick the next code and try out.
Step 6. Press the Volume or Power button to check if your TV has been programmed. If it works, Viola, you can continue using your remote.

Codes 3-Digits

Admiral   902, 614, 615, 501, 500, 610

Advent      911, 303, 933, 909, 932, 934, 919, 614, 109, 082

Aiko      900

Akai      903, 601, 039, 117, 027, 038, 041, 039

AOC      617, 079, 077, 080, 103, 601, 076

Apex     604, 000, 618

Aspect   606

Audiovox   901, 100, 101, 900

Belcor     617

Bell & Howell    611, 620

Bradford    901

Brockwood    617

Broksonic      614, 902

Candle      619, 601

Celebrity     605

Celera     094, 092

Changhong   618

Citizen     601, 903, 900, 614, 619

Clairtone   103

Concerto   619

Contec     103, 901

Craig    901

Crosley   103, 901

Crown   901

Curtis Mattes   405, 301, 400, 500, 606, 611, 619, 405, 102, 603

CXC     901

Daewoo     617, 900, 100, 101

Daytron     617

Dumont    617, 700

Duraband    201, 902, 918, 914, 615, 614

Dynex     085, 109, 614, 086, 102, 619, 910, 110

Electroband    103, 605

Electrohome    614

Element       114, 116, 115, 112, 113

Emerson       902, 620, 201, 617, 602, 101, 103

Envision    601, 902, 077, 080, 076, 079

ESA         201, 901, 903, 601

Fisher      801, 620

Fujitsu     300, 615

Funai      615, 901, 201, 022

Futuretec    901

GE     202, 100, 400, 802, 405, 042, 608, 401, 200

GFM    022, 201

Gibralter     601, 700, 617

Goldstar      617, 619, 607, 601

Grundy      615, 901

Haier       918, 914, 045, 093, 096, 092, 097, 095

Hallmark     607

Harvard     901

HCI          021, 020

Hitachi     619, 606, 060, 916, 005

HP      075

ILO      925, 921, 059, 916, 005

Infinity    301

Infocus    400

Inteq       700

Insignia    086, 614, 201, 909, 903, 934, 083, 117, 111, 109, 084

JBL     301, 604, 618, 000

JVC     701

KEC     901

Kenwood     617, 601

KLH       618

KTV       103, 601, 901

Kolin   025, 023, 026, 024

Konka     001, 904, 003, 117, 083, 041

LG      910, 619, 700

Logik     611

Luxman    619

LXI     301, 400, 609, 402, 607, 620

Magnavox   302, 601, 301, 615, 303, 905, 907, 906, 078

Majestic   611

Marantz    601, 301

Matsushita   004

Megatron    606, 607

MEI      103

Memorex      004, 614, 012, 934, 301, 004, 095, 611, 700, 201, 300

MGA      601,104,  617, 500, 607

Midland   700, 400, 402, 202

Millrock    018

Minutz     608

Misakai     201

Mitsubishi     104, 607, 500, 601, 617

Motorola    802, 500

MTC     601, 903, 103, 619, 617

Multitech     901

NAD     607, 603, 609

NEC     617, 601, 619

Nikko     900, 601, 607

Norcent      079, 078

Noshi       800

NTC     900

Olevia    023, 025, 024, 026, 923

Onwa    901

Optimus    004, 620, 603

Optonica     610, 500

Orion      614, 619, 902, 615

Panasonic     202, 610, 004, 303, 302, 802, 056, 055

PDI      008, 007, 009, 010

Philco     614, 304, 617, 606, 601

Philips     909, 301, 601, 615, 303, 302, 078, 906, 036, 040, 048, 011

Pilot       617, 601

Pioneer     600, 603

Polaroid     031, 400, 915, 920, 032, 083, 041, 109, 028, 030, 917

Portland      900, 617

Prima      085

Prism      202

Proscan     074, 400, 085, 112, 402

Proton      102, 607

Proview       113, 115, 116, 112, 114

Pulsar     700, 617

Quasar     202, 004, 802, 610

Radioshack     620, 610, 607, 400, 402, 619, 617

Realistic      901, 620, 619, 607, 617, 610

RCA     800, 403, 400, 402, 404, 623, 405, 042, 600

Rhapsody     103

Roomconx      615, 614, 924, 902

Runco        601, 616 700

Sampo      601

Samsung     903, 930, 617, 619, 607

Sansui      902, 614, 109, 615

Sanyo       801, 931, 620

Scotch       607

Scott      607, 901, 615, 617, 902

Sears      620, 400, 615, 609, 402, 201, 801

Sharp      610, 500, 929, 501

Sharp LCD   929, 912

Shogun      617

Signature   611

Simpson     803

Sony   605

Soundesign    607, 615, 901

Soyo      073, 061, 072, 066, 054, 070, 069, 066, 068

Squareview    201

SSS     617, 901

Starlite    901

Superscan    500, 201, 912, 929

Supreme   605

Sylvania      601, 201, 301, 901, 022

Symphonic     022, 301, 901

Syntax    024, 025, 023, 026

Syntax     024, 023, 026, 025

Tandy     500

Tatung    802

Technics    202, 004

Techwood    619, 202

Teknika     901, 104, 617, 301, 611, 900, 605

TMK     602, 619, 607

Toshiba     903, 609, 910, 620, 619, 613, 058

Trutech       201, 617, 101, 900, 017, 015, 106

Victor      701

Vidtech   617, 607

Viewsonic     088, 090, 087, 099, 107, 105, 019, 106

Viore   903

Vivtek     058

Vizio     011, 927, 013, 014

Wards    601, 610, 301, 611, 617, 619, 608, 607         

Westinghouse    049, 051, 052, 054, 053, 926, 928

White Westinghouse     605, 101, 614

Yamaha     617, 601

X2-GEN    057

Zenith      614, 900, 700, 910, 078, 611, 619

REPAIR / SERVICING TV FUSION FLTV-40K62

Technical description and composition of the FUSION FLTV-40K62 TV, type of panel and applicable modules. The composition of the modules.
FUSION LED
Model: FLTV-40K62
Chassis / Version: TP.VST59S.PC1
Panel: 720p HD, 1366x768
T-CON: 14Y_GA_40FMB7S4LV0.2
LED driver (backlight): integrated into MainBoard
PWM LED driver: OB3350CP
MOSFET LED driver: AOD4454
Power Supply (PSU): integrated into MainBoard
PWM Power: PWM SOT23-6
MainBoard: TP.VST59S.PC1
IC MainBoard: SPI Flash: 25q32; SOUND: TPA3110LD2
Tuner: NoName
Technical Specifications FLTV-40K62
FUSION FLTV-40K62
General repair guidelines for TV LCD LED
Repair of electronic devices, including the FUSION FLTV-40K62 TV, it is advisable to start with an external examination of its external and internal elements. Many visible changes in the state of the elements make it possible to determine the future direction of the troubleshooting. Useful tips can include swollen capacitors, ring cracks formed in the soldered terminals, a charred paint layer on the resistors, signs of overheating of the board, and many other external signs familiar to experienced repairmen.
If the TV does not turn on, no control lights are on or blinking, there are no sounds when you turn on, there is not the slightest sign of operability - the most likely malfunction is in the power module. In the absence of swollen filter capacitors of the secondary rectifiers, the diagnostics of the power supply should be started by checking the fuse and, if it is broken, it is first necessary to check all the power semiconductor elements of the primary circuit - diodes and transistors for the possibility of an avalanche or thermal breakdown.
Mos-Fet keys used in switching power supplies (SMPS) rarely fail for no reason to look for when checking other circuit elements. Often the breakdown is caused by malfunctions of electrolytic capacitors or semiconductor elements in the primary circuit, or by a break in the resistors in the stabilization circuits. The PWM controller chip may also cause a breakdown of the power switch of the converter.
In cases where the FUSION FLTV-40K62 TV has lost its image, and the sound is there and all other functions are operational, there is a possibility of a malfunction of the LED driver (converter for powering the backlight LEDs of the panel 720p HD, 1366x768). When you turn on the TV, the image may appear briefly and disappear immediately. It must be borne in mind that with such manifestations the LEDs themselves also fail.
To check the health of the LEDs, as well as the contact connections in the ruler circuit, it is necessary to disassemble the panel.
To check the health in the LED circuit, it is better to use a current source with a maximum voltage of 200V. We do not recommend using any voltage sources for this purpose. You can test each LED individually with a simple Chinese multimeter (powered by 9 volts) in the P-N-junction test mode. If you connect the red probe of the multimeter to the anode of the LED, and the black to its cathode, then the LED will light up slightly.
When trying to repair the motherboard, you should first check the serviceability of linear stabilizers or power converters of microcircuits and, if necessary, update the software (software).
In cases of complex repairs of MB (SSB) and in the presence of the necessary skills and equipment, sometimes it may be necessary to replace its SPI Flash chips: 25q32; and other possible malfunctioning components. Malfunctions associated with the application of BGA soldering technologies are usually easily diagnosed by warming up.

Remember! Attempts to self-repair by users of the FUSION FLTV-40K62 TV without the appropriate qualifications and necessary experience can lead to serious negative consequences!

FIRMWARE FOR SPI FLASH  ----------->   FUSION FLTV-40K62, Main: TP.VST59S.PC1

  Backlight Current Limit:

There are four series-connected resistors on the board - 1.5 Ohm, 1.5 Ohm, 3 Ohm, 3 Ohm from the cathodes of the LEDs to ground. You can reduce the backlight current by about 30% by removing one 1.5 Ohm resistor.

Repair MainBoard
The appearance of MainBoard TP.VST59S.PC1 is shown in the figure below:
TP.VST59S.PC1
TP.VST59S.PC1 can be used in TVs:
FUSION FLTV-40K62 (Panel 720p HD 1366x768), HYUNDAI H-LED32V26 (Panel ST3151A04-3 / (CS)), TELEFUNKEN TF-LED32S26 (Panel MT3151A04-1-XC-9), TELEFUNKEN TF-LED32S11 (Panel E32-9100).
Main features of the FUSION FLTV-40K62 device:
Installed matrix (LED-panel) 720p HD, 1366x768.
The matrix control uses the Timing Controller (T-CON) 14Y_GA_40FMB7S4LV0.2.
To power the backlight LEDs, a converter is used, combined with the TP.VST59S.PC1 main board, controlled by the OB3350CP PWM controller. As power elements of the LED driver, keys of the AOD4454 type are used.
The power module is combined with the MainBoard and is made according to the flyback AC / DC voltage converter circuit using PWM SOT23-6 microcircuits.
MainBoard - the main board (motherboard) is a TP.VST59S.PC1 module, using SPI Flash chips: 25q32; SOUND: TPA3110LD2 and others.
The NoName tuner provides television reception and channel tuning.
FUSION FLTV-40K62 TV with a 720p LCD display, 40 "(102 cm) diagonal size in 16: 9 format. The LED panel of this TV has LED backlighting - Edge LED. You can view images in high quality HD with a resolution of 1366x768 pixels in the standard of graphic decomposition 720p (HD Ready). The input high-frequency or video signal can be processed in analog systems PAL, SECAM, NTSC. Graphic processing and digital signal generation occurs in the standards 480i, 480p, 576i, 576p, 720p, 1080i.
The power of the sound system 10 W (2x5 W) provides two speakers. The audio processing system NICAM STEREO is used.
The external interface (communication with other devices) is supported by standard input and output connectors: antenna input (RF), AV, audio x2, component, VGA, USB. To connect a computer or laptop to this TV model, a VGA (D-Sub 15) connector is used on the TV case, this interface supports resolutions: 640x480, 800x600, 1024x768, 1360x768.
Attention! The 720p HD, 1366x768 panel of the FUSION FLTV-40K62 LED TV is an expensive and unreliable element.
Avoid any impact on the glass and pressure on the surface of the screen to avoid damage to the LED panel!
It is also unsafe to get liquid on the screen. Sometimes one drop is enough if it flows down the glass onto the cables so that the TV becomes unrepairable.

ANDROID USB OTG CABLE WORK WITH FLASH HDD MOUSE KEYBOARD AND OTHER

Android USB OTG cable work with flash HDD mouse keyboard and other.

 Note : Support: usb flash drive, external hdd, mouse, keyboard

Pin	Name	Direction	Color	Description
1	Android USB OTG cable for flas			Android USB OTG cable for flash HDD mouse keyboard

also may include resistor on 5 

NOKIA GS101 OR ONLY CA-101 / RJ45 GS101 OR MICRO USB PINOUT CA-101 CABLE

rj45 GS101 or micro usb pinout CA-101 cable. 

 nokia micro usb ca-101

APC USB CABLE SCHEMATIC AP9827

Pin	Name	Direction	Color	Description
1	USB +5V (red wire)			USB +5V (red wire)
4	chassis ground			chassis ground
7	USB GND (black wire)			USB GND (black wire)
9	USB Data- (white wire)			USB Data- (white wire)
10	USB Data+ (green wire)			USB Data+ (green wire)

PORSCHE 997.1 TURBO DME PINOUT ECU

Porsche DME control module connector assignment.

OBD2 TO RS232 INTERFACE CABLE SCHEME AND PCB

ODB2 to rs232 interface cable OBD II.......

OBD1 OBD PINOUT SERIAL CABLE DESCRIPTION

Cable description.

CA-101 MICRO USB TO RJ45

CA-101 micro usb pinout Nokia Samsung HTC LG.

75-120-OHM ADAPTER CABLE COSCO RJ45 E1 G703

The 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines. The adapter has an eight-pin RJ-48C connector on the 120-ohm side and dual BNC coaxial connectors (transmit and receive) on the 75-ohm side. Two switches on the 120-ohm side allow the outer conductor of the cable (the input port of the E1 port adapter) to be either isolated from or connected to a protected earth ground.

SAMSUNG GALAXY I9000 HEADSET PINOUT

Samsung Galaxy i9000 headset pinout Resistance between ring2 and sleeve, when pushbutton is: -pressed: 280 ohm -not pressed: 2.2k ohm  


 

Pin	Name	Direction	Color	Description
1	tip			Left Audio
2	Ring1			Right Audio
3	Ring2			Mic / pushbutton
4	Sleeve			Ground

 Note : Resistance between ring2 and sleeve, when pushbutton is: -pressed: 280 ohm -not pressed: 2.2k ohm

PORSCHE 911 CARRERA 3 2L ECU PINOUT

Pinout 911 Carrera 3 2L ECU Pinout

APPLE LIGHTNING ADAPTIVE CABLE

Apple Lightning interface is adaptive - the controller chip dynamically assign pins function according to plugged device.

Pin	Name	Direction	Color	Description
1	GND			GROUND
2	L0P			line 0 positive
3	L0N			line 0 negative
4	ID0			identification control 0
5	PWR			+ Voltage
6	L1N			line 1 negative
7	L1P			line 1 positive
8	ID1			identification control 1

 Note : Apple Lightning interface is adaptive - the controller chip dynamically assign pins function according to plugged device. The Apple Lightning connector plug can be inserted with either side facing up (the processor inside the plug detects the plugs orientation and routes the electrical signals to the correct pins).Two differential pair lanes (L0p-n and L1p-n) may swap in IC of device connector (lanes dont swap if accessory identification chip connect to ID0 pin). Two differential pair lanes (L0p-n and L1p-n) may swap in IC of device connector (lanes dont swap if accessory identification chip connect to ID0 pin) also you dont want to swap out cables with another iPID0 pin) also you dont want to swap out cables with another iPhone-iPad user as there seems to be memory issues if you do; your device will no longer charge w- the shared Lightning Cable. Apple included an authentication chip in the Lightning cables which was already explored and reproduced by some chinese manufacturers. There has to be a 2V DC power source down the ID rail for the connections to transfer data

COMMODORE C64 / VIC20 CONTROL PORT PINOUT DIAGRAM

  9 PIN D-SUB MALE at the computer.