REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday 20 March 2019

BW - 0378 - REMOTE CONTROL - SETUP PROCEDURE

BW - 0378 - REMOTE CONTROL - SETUP PROCEDURE



SETUP PROCEEDINGS
  1. Refer to the DEVICE CODE LIST, look up the 4-digit Device Code, which corresponds to the brands of your A/V equipment. If there are more than one Device Code listed under your brand, try from the first code.
  2. Press a desired Device Mode Key (e.g. ).
  3. Hold down “ P+” and “ VOL–”on the URC together simultaneously for 2 seconds until the indicator lights up.
  4. Use the number keys to enter your 4-digit Device Code, the indicator should go out immediately.
  • Turn on your device (e.g. TV), try the function keys on the URC. If your device (e.g. TV) responds to your invoked function correctly, you have entered the right Device Code. Otherwise, repeat the above setup instructions with the rest available Device Codes until your device (e.g. TV) responds to your evoked function, and most keys work correctly.
  • Simply repeat the above procedures to enter the Device Codes for your VCR, SAT, DVD or CTV. (Remember to press a correct Device Mode Key in step 2 above).
Note :  DVD, CTV and other Device Codes can be entered into any device modes except “TV” & “VCR” modes. Just simply press the device mode key and enter your 4-digit device code for DVD, CTV and other devices.  If the indicator flashes twice in step 4, a wrong Device Code has been entered. You are required to repeat step 2 to 4 again.
Suggestion :   If you cannot find a correct Device Code for your equipment, do a code search method.
CODE SEARCH METHOD
  1. Turn on your device manually (e.g. TV).
  2. Press a desired Device Mode Key (e.g. ).
  3. Hold down “ P+” and “ VOL–” on the URC together simultaneously for 2 seconds until the indicator lights up.
  4. Enter a corresponding Magic Search Code from following table. The indicator should go out immediately. 
  5. Press the same desired device mode key again as in step 2 above. (e.g. )
  6. Hold down “ P+” & “ VOL–” together simultaneously for 2 seconds until the indicator lights up, and your URC is ready to start searching.
  7. Aim the URC at your device (e.g. TV), press the “O ” key repeatedly, slowly and patiently until the device has been turned off.  Once your device has been turned off, immediately press “ P+” and “ VOL–” to lock in code and the indicator should go out.
Once your device has been turned off, immediately press “ P+” and “ VOL–” to lock in code and the indicator should go out.
  • Simply repeat the above setup procedures to search the Device Code for your VCR, SAT, DVD or CTV. (Remember to press a correct Device Mode Key and correct Magic Search Code in step 2-5 above).
Posted By: FRANK at 06:30
TAG: ,