PHILIPS 32PFL3506/F7 - 32PFL3000/F8 -SERVICE MODE-INITILIZATION-POWER _ INVERTER SCHEMATIC DIAGRAM
How to enter service mode - How to initialize - Main power & back-light Inverter CBA circuit diagram - Philips 32PFL3506/F7 - 32PFL3000/F8
* Turn the power on.
* Press [MENU] button to display Setup menu.
* Select “Features”.
* Select “Current Software Info”.
* Press [0], [6], [2], [5], [9], [6] and [INFO] buttons on the remote control unit in this order. The following screen appears.
* Press [MENU] button to display Setup menu.
* Select “Features”.
* Select “Current Software Info”.
* Press [0], [6], [2], [5], [9], [6] and [INFO] buttons on the remote control unit in this order. The following screen appears.
HOW TO IINITIALIZE
The purpose of initialization is to place
the set in a new out of box condition. The customer will be prompted to select
a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
Turn the power on.
* Enter the service mode. [To cancel the service mode, press [Power] button on the remote control unit.]
* Press [INFO] button on the remote control unit to initialize the LCD television.
* "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed.
* Enter the service mode. [To cancel the service mode, press [Power] button on the remote control unit.]
* Press [INFO] button on the remote control unit to initialize the LCD television.
* "INITIALIZED" will appear in the upper right of the screen. "INITIALIZED" color will change to green from red when initializing is completed.
MAIN POWER SUPPLY [SMPS] SCHEMATIC
BACK-LIGHT INVERTER SCHEMATIC
Fixed voltage (or Auto voltage selectable) power supply circuit is used
in this unit. If Main Fuse (F601) is blown , check to see that all
components in the power supply circuit are not defective before you
connect the AC plug to the AC power supply. Otherwise it may cause some
components in the power supply circuit to fail. The voltage for parts
in hot circuit is measured using hot GND as a common terminal.
CLICK ON THE PICTURES TO MAGNIFY