HARMAN/KARDON BDT 30/230 - BDT 3/120 BLU-RAY PLAYER - - SMPS CIRCUIT DIAGRAM

BDT 30/230 - BDT 3/120 Blu-ray player - harman/kardon - SMPS Circuit diagram

harman/kardon - BDT 30/230 - BDT 3/120 Blu-ray player – SMPS schematic – General troubleshooting – Firmware update Procedure.

SPECIFICATIONS

> Supported disc formats: 5-inch (12cm) or 3-inch (8cm) Bd-video (single-layer or double-layer), Bd-R, Bd-Re, DVD-video, DVD+R/+RW, dvd-R/-RW, CDDA (CD digital audio), CD-R/RW discs
> Region code (BD/DVD): A/1 (BDT 3); B/2 (BDT 30)
> Audio formats: DOLBY digital, DOLBY digital Plus, DOLBY Truehd, dTs digital, DTS-HD high Resolution
> Audio, DTS-HD Master Audio, PCM, CBR @192kbps, vBR @ 355kbps, MP3: 32kbps – 320kbps bitrates, including variable bit rate encoding still-image format: JPEG video signal system: NTSC (BDT 3); PAl (BDT 30)
> HDMI version: 1.4a with 3-d and 30/36-bit deep color
> Power requirement: Ac 110 – 240v, 50/60hz
> Power consumption: 25W maximum, <0.5W standby
> Dimensions (h x W x d): 2-5/8" x 17-5/16" x 13-7/8" (66mm x 440mm x 352mm)
> Weight: 8.2 lb (3.7kg).

* 06-RC2410-A001 REMOTE CONTROL

* 08-0BDT30-PWY ASSY-POWER BOARD

* 43-FS512S-216 DC FAN 5012F 320MM

Preparation to upgrade software

1 Power on the set and press “settings” button on the remote.
2 Press left cursor to select "Information". Check the Software Version.
3  Check that the software version is correct in the UPG folder.  For example: if the software version is displayed as “BDT20 XX.XX.XX”, the correct software is “BDT20_BD.bin”. Otherwise, the software is “BDT2_BD.bin”.
4 Start the CD Burning software and create a new CD project (Data Disc). Copy the UPG folder to the root directory of the data disc.
5 Burn the data onto a blank CDR.

Upgrade software via CDR
1 Power on the set and insert the prepared Upgrade CDR.
2 The set will start reading the disc .
3 When the BDT recognizes the disc, press Setting > System > System >  Upgrade > Disc. Follow the instructions on the screen.
4 About 3 minutes later, the BDT will automatically turn off, when upgrade has been completed.

Upgrade software via USB Flash Drive
1 Decompress the packed file, copy the UP G folder to the root directory of a USB memory device.
2 Insert the USB. The player will recognize the USB device automatically.
3 Press Setting > System > System Upgrade > Disc. Follow the instructions on the screen.

4 About 3 minutes later, the BDT will automatically turn off, when upgrade has been completed.

Read out the software version to confirm upgrade
1 Power on the BDT and press the “Settings” button on the remote.
2 Press left cursor on remote control to select "Information". The software version and other information will be displayed on the TV screen as follows:
Software Version: BDTX XX.XX.XX
Mac Address:XX-XX-XX-XX-XX-XX
Caution: The set must not be powered off during upgrading. Otherwise the Main board will be damaged entirely.

TROUBLESHOOTING

The player won’t power up (the Power indicator is not lit)  

* Check that the player’s Ac power cord is properly plugged into the player’s Power cord connector.
* Check that the player’s Ac power cord is plugged into a working Ac outlet and that the Ac outlet is not controlled by a switch.
* Make sure that the Master Power switch (on the player’s rear panel) is in the “On” position.

The disc does not play  

* Check that the disc is inserted correctly (label side up).
* Check that the disc is the correct type: Bd-video (single-layer or double-layer), DVD-VIDEO, DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio), CD-R/RW. Other disc types will not play.

No picture

* Check the connection between the player and the TV.
* Check that the Tv is turned on and that it is set to the correct input source.
* Confirm that all of the choices made in the display settings menu are correct for your TV.
* Check that the TV is HDCP-compliant. The player cannot be used with a TV that is not HDCP-compliant.

No sound

* Check that the HDMI and/or coaxial digital connections are properly made.
* If you’re using the coaxial digital connection, check that the digital audio settings on the connected device have been properly set.
* If you’re using only the HDMI connection, check that the HDMI audio settings on the connected device have been properly set.
* If you’re using only the HDMI connection, check that the BDT 3/BDT 30’s HDMI Audio Output is set to “On.”

The picture appears in the wrong aspect ratio

Change the Aspect Ratio setting in the display settings menu to match the TV.

There is noise or other interference in the picture while playing a Blu-ray disc recording or DVD.

Check that the disc surface is clean and not scratched.

Cannot access media on a connected USB device

Check that the device is formatted in the FAT-32 fie system. Other fie systems are not compatible with the BDT 3/BDT 30.

The player does not respond to remote-control commands.

* Replace both remote-control batteries with fresh ones, and make sure that they are installed correctly.
* Hold the remote control closer to the player.
* Check that the player’s remote sensor is in the remote control’s line of sight.
* Make sure that the protective shipping film has been removed from the player’s front panel.

The Ø symbol appears on the screen when you press a remote-control button 

The selected function is not permitted at the time you press the button.

The player does not respond to commands, or it behaves in an erratic way:

Unplug the player’s power cord from the Ac outlet, wait 30 seconds, and plug it back in.

SMPS SCHEMATIC & PWB

CLICK ON THE PICTURES TO MAGNIFY