REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 15 March 2019

HITACHI - DV-DS253E - HDD/DVD RECORDER HOW TO UPDATE FIRMWARE

HITACHI - DV-DS253E - HDD/DVD RECORDER

HOW TO UPDATE FIRMWARE_


CHECKING FIRMWARE VERSION
  • With the HDD/DVD recorder turned on, make sure that no disc is inserted.
  • Connect a monitor TV to the video output terminals on this HDD/DVD recorder.
  • Press the SETUP button on remote control and use the cursor up and down buttons to choose the “LOCK” menu.
  • Press numeric buttons “7” “8” “8” “9” on the remote control in sequence.
  • The firmware version screen will appear on the monitor TV
  • Turn the HDD/DVD recorder off to switch off the display
[CLICK ON THE PICTURES TO ZOOM]
Method of starting up firmware update program
  1. Turn the HDD/DVD recorder on and press the OPEN/CLOSE button.
  2. Insert the firmware disc.
  3. Press HOME button on the remote control to display the Home Menu screen.
  4. Select the [MOVIE]. Options appear.
  5. Select the [DISC] and press the ENTER button: The screen for verifying update will appear.
  6. Select the [YES] and press the ENTER button: The firmware update program will start up. The screen for verifying update will appear.
Main firmware updating procedure.  To make Main firmware updating CD
  • Store the Main firmware data in PC.
  • Start a CD writer program, and drag the Main firmware data file (write it to the Root folder on CD).
  • Check the file name (LG_HDR_UPDATE.004). If it is incorrect, rename it.
  • Change the volume name of CD to RH1000_UP.
  • Write the Main firmware data to a CD-R or CD-RW.
To update main firmware
Refer to  Method of starting up firmware update program” and start the firmware update program: Once the firmware update program has started, the screen will appear.
  • Press the REC button on this HDD/DVD recorder three times: Both the current version of main firmware and the version of main firmware on the disc will appear on the screen.
  • Pressing the REC button on this HDD/DVD recorder will start writing. To cancel writing, press the OPEN/CLOSE button and remove the disc.
  • When updating is complete, the tray will open automatically: Remove the disc.
  • Turn the HDD/DVD recorder off and then on: The firmware is now updated.

Loader firmware updating procedure: To make loader firmware updating CD
  • Store the loader firmware data in PC, and decompress it: Three files (prm, bin, bin) will appear.
  • Start a CD writer program, and drag the three loader firmware data files (write them to the Root folder on CD).
  • Change the volume name of CD to DRIVE_UP.
  • Write the loader firmware data to a CD-R or CD-RW.
To update loader firmware
Refer Method of starting up firmware update program” and start the firmware update program: Once the firmware update program has started, the screen will appear.
  1. Press the REC button on this HDD/DVD recorder three times: The data on disc will be read, the Firmware Update screen will appear, and the loader firmware version along with the version of loader firmware on the disc, will appear on the screen.  When reading the data on disc is complete, the disc tray will open automatically: Remove the disc.
  2. Pressing the REC button on this HDD/DVD recorder will start writing. To cancel writing, press the OPEN/CLOSE button.
  3. Turn the HDD/DVD recorder off automatically.
Main/Loader firmware simultaneous updating procedure
To make firmware updating CD
  • Start a CD writer program, and drag the main and loader firmware data files (write them to the Root folder on CD).
  • Change the volume name of CD to RH1000_UP.
  • Write the main and loader firmware data to a CD-R or CD-RW in the “Track at once” mode.
To update firmware
Refer to Method of starting up firmware update program” and start the firmware update program: Once the firmware update program has started, the screen.
  • Press the REC button on this HDD/DVD recorder three times: The screen for choosing the firmware programs to be updated will appear: Choose “All”.
  • The method of simultaneously updating the Main/Loader firmware programs is basically the same as that for updating individual programs.
  • After the Main firmware is updated, the Loader firmware-updating screen will automatically appear.
Posted By: FRANK at 06:28
TAG: , ,